Toshiba RD-XV47KE manual Angle Icon Default Off, TV System Default PAL, Replay/Skip Speed

E3B90ED_EN.book Page 97 Friday, February 23, 2007 12:38 PM

•Press [CLEAR] to erase numbers entered incorrectly.

If you forget your password or you want to clear all settings in Parental Lock, press and hold [CLEAR] for 8 seconds. Your password is cleared and parental levels are set to “All”.

7. Angle Icon (Default: Off)

You can set to “On” to show the Angle icon on the screen whenever the feature is available.

(Follow steps 1 to 2 on page 94 and see page 76.)

Select “Angle Icon” using

[Cursor U / D], then press [ENTER].

Select the desired setting using [Cursor U / D], then press [ENTER].

On

Off

The selected setting will be checked and activated.

8. TV System (Default: PAL)

You can set the TV system.

(Follow steps 1 to 2 on page 94.)

Select “TV System” using

[Cursor U / D], then press [ENTER].

Select the desired setting using [Cursor U / D], then press [ENTER].

PAL

Auto

The selected setting will be checked and activated.

PAL: Outputs a modified PAL signal for viewing discs recorded with the NTSC system on a PAL system TV.

Auto: Changes the video system (PAL / NTSC) automatically according to the format of the inserted disc.

Note

•With discs recorded using the PAL system, a PAL signal is output for viewing on a PAL system TV.

•Discs recorded with the PAL system cannot be viewed on an NTSC system TV.

•With discs recorded using the NTSC system, an NTSC signal is output for viewing on an NTSC or Multi system TV.

•With discs recorded using the NTSC system, select PAL to view on a PAL system TV.

9. V. Replay/Skip Speed

Assign the [VARIABLE REPLAY] or [VARIABLE SKIP] button to rewind or skip by a certain amount of time.

(Follow steps 1 to 2 on page 94 and see page 72.)

Select “V. Replay/Skip Speed” using [Cursor U / D], then press [ENTER].

Sub Menu will appear.

Select a desired item to set using [Cursor U / D], then press [ENTER].

Variable Skip

Variable Replay

Refer to the explanations below and set the selected item.

Variable Skip (Default: 30 seconds) Sets the amount of skip time for [VARIABLE SKIP].

Variable Skip

15 seconds

30 seconds

1 minute

Variable Replay (Default: 15 seconds)

Sets the amount of rewind time for

[VARIABLE REPLAY].

Variable Replay

15 seconds

30 seconds

1 minute

10. Initialise (Default: No)

Initialise the setting in Playback.

(Follow steps 1 to 2 on page 94.)

Select “Initialise” using

[Cursor U / D], then press [ENTER].

Confirmation window will appear.

Select “Yes” using [Cursor L / P], then press [ENTER].

Initialise 01/01/07(Mon) 19:34

Initialising the playback settings.

Setting will be reset to the factory default.

OK to proceed?

YesNo

Your setting in Playback will be initialised.

EN 97

Introduction Connections Basic Setup Recording Playback

Editing Function Setup VCR Functions Others