Toshiba kV-9168A instruction manual Recording, Camera and monitor TV

Page 24

PREPARATIONINTRODUCTION

RECORDING OPERATION

RECORDING

Turn on the power for this VCR as well as associated			5	Insert a video cassette to this VCR.
devices of the surveillance system including the video				• Check that the safety tab on the video cassette has
1 camera and monitor TV.				not been removed.
				REC CHECK TIMER	REC	VIDEO MODE
						AUTO COLOR B/W
						REMOTE	TIME LAPSE VCR
				POWER	EJECT	OFF REMOTE OPTION
				POWER	EJECT
						BUZZER	4Head 168Hour
						ON OFF	4Head 168Hour
				PICTURE
						TAPE REMAIN		DISPLAY – TIME MOD
				SOFT	SHARP	COUNTER		SET
				SOFT	SHARP	COUNTER		SHIFT
						MEMORY ALARM	RESET
Adjust the monitor TV so that the picture from the			6	Select the recording time mode.
2 video camera is displayed properly.			6			REC		H
						REC		SP
								SP
				– TIME MODE +
				SET
1	2	3

RECORDING	OPERATION

PLAYBACK	OPERATION

NOTICE

Check that the date time display on the monitor TV is	7	Press the REC button.
3 correctly displayed.	7		REC	H
		REC	REC	SP
		REC		SP

8/28/97 THU 17:30:05SPA 2

1 2 3

Set the various functions such as timer recording,

4 alarm recording, restart recording, tape end, etc.

Notes:

iWhen the PAUSE button is pressed during recording, the VCR goes to the pause mode. To release, press either the PAUSE button again or the REC button. If the VCR is in pause mode for longer than 10 minutes the VCR will automatically go into stop mode to protect the video tape and heads.

iRepeat recording, restart recording, alarm recording, etc. also operate during recording.

iWhen recording is interrupted or the recording time is changed, the pictures may be disturbed at that location.

iIf a power failure should occur, it is possible to resume recording in the same time mode as long as the power is restored within approximately 10 days.

iDuring repeat recording, pay attention to the following points.

•Timer recording and alarm recording is not possible during automatic rewind.

•The buzzer does not sound even at tape end.

•When an operation button is pressed during automatic rewind, the repeat recording function does not operate. Reset to the recording mode.

iThe time mode button is not accepted during alarm recording or timer recording.

iMake sure to carry out daily check for repeat recording or timer recording.

23

Image 24

Contents Instruction Manual Important Precautions Please ReadImportant Safety Instructions Power SourcesRadiators, heat registers, stoves Unplug this product from the wallAccessories Power LinesWhen the power-supply cord or plug is damaged To restore the product to its normal operationFeatures Table of ContentsInstructions in Brief Front PanelTime Mode / SET + buttons Tape Remain buttonCassette Compartment Display buttonRear Panel Word on the Exclusive 3N-100AAS Battery Pack Specification of BatteryInstallation RemovalVCR Display REW button Press to start play backFF button Connections Connection with a Video CameraTypical Connection with the Sequential Switcher VideoTo REC TRIGG. OUT OutputContents of Screen Display Alarm Recall Screen Setting the Clock OperationON-SCREEN Functions Date-Time DisplayVCR display Monitor screenDisplay Screen Alarm number Is pressed. When an alarm isChanges to the alarm number This function enables to indicate and record informationAlarm Memory Counter DisplaysCounter Memory Error Message Tape RemainCode Number Condition of Abnormality Setting the RECORDING/PLAYBACK Time HOW to Operate 24 Hour Virtual Real Time ModeA18 20s Fields/s Possible Continuous Virtual Real Time mode Loading and Unloading a Video Cassette Loading a cassetteUnloading a Cassette Recording Camera and monitor TVSetting the Restart Recording Restart RecordingTimer Recording Setting the Timer ProgramDaily Timer Recording Program ScreenTime Mode button is pressed, the display Power goes off and the Timer display lightsShould be more than 1 minute. If they are same, timer During timer power off mode, alarm recording will notWeekly Timer Recording Press the Shift ButtonGRAM.to blink PROPress the Shift Button to blink the MO1 start time Overlapping Programs ExampleFR2 DLYAlarm Recording Operation at Alarm InputAlarm Recall Display Event RecordingConnecting the Alarm Terminals Setting the Alarm Recording Display Recording timeCont ManualConnecting the External control terminal Auto RecordingOperation of Auto Recording Auto recordingHow to release Auto Recording How to forbid Auto RecordingPress Timer button to release the timer mode Press the + or SETHow to Set to Stop at End of Tape Setting contents Buzzer Screen display Counter displayOperation After Tape END Detection Display Operation after detection of tape endHow to Set to Auto Rewind at End of Tape Alarm recording does not operate during auto-rewindMenu Screen How to Set to Repeat Record at End of Tape ButtonREC. to select REW →Recording with the Sequential Switcher Connection with the Sequential SwitcherTiming for Camera Switching C D a B C DREC Trigger Output Selection in the Alarm Recording Tracking Adjustment Recording time mode Time mode for playbackPlayback Using the Shuttle Dial REW StopPicture Search Play Slow Still PlayPlayback in Various Modes Time Date Search Search OperationAlarm Search Alarm M to lightStill picture mode Press the Play button Press the Counter Memory button twice to makeSignal Levels of INPUT/OUTPUT Terminals Input/Output Terminal Signal level Additional remarksCheck the playback picture recorded in SPA2 mode Press the or Time Mode button to go to SPA2 modeDaily and Periodic Inspection Order of Daily ChecksRecording Usage frequency Time mode Steps to Take after Daily ChecksRequest for Periodic Checks Tape Usage FrequencyDew Condensation Before Calling Service Personnel InstallationFunction/Operation RecordingPlayback Other mattersSpecifications Connector sectionAccessories Dew caution sheetLimited Warranty 70971825