Toshiba kV-9168A instruction manual Steps to Take after Daily Checks, Request for Periodic Checks

Page 47

Steps to Take after Daily Checks

If an abnormality is found, turn the power switch to OFF and remove the power plug from the household AC outlet. Then consult with your dealer.

INTRODUCTION

A Request for Periodic Checks

iThis VCR includes a time gauge to display the total usage time. The total usage time is displayed on the SETUP (2) screen.

Periodically make sure the usage time.

Total time:Max. 99999 hours (approximate value)

Time since the last maintenance: Max. 9999 hours (approximate value)

Press the DISPLAY

1 button.

DISPLAY – TIME MODE +

SET

SHIFT	TRACKING
SHIFT
	LOCATION SELECT

M E N U

CLOCK ADJUST SETUP DISPLAY MODE PROGRAM ALARM RECALL TIME DATE SEARCH

END=[DISPLAY]

PREPARATION

iRegularly clean and replace parts in this VCR using the displayed usage times as a guide.

For further details, consult your dealer.

Press the SHIFT button

2 to blink SETUP and press the SET button.

DISPLAY – TIME MODE +

SET
SHIFT	TRACKING
SHIFT
	LOCATION SELECT

S E T U P
ALARM REC TIME	15S
SPEED	SPA 2
RESTART REC	OFF
TAPE END MODE	STOP
ALARM	STOP

MENU=[DISPLAY]

RECORDING

OPERATION

Press the SHIFT

3 button to change to SETUP screen (2).

DISPLAY – TIME MODE +

SET

SHIFT	TRACKING
SHIFT
	LOCATION SELECT

S E T U P

REC TRIGGER SEL. FIXED

USAGE TIME TOTAL	0H
HEAD	0H

MENU=[DISPLAY]

Tape Usage Frequency

Replace tapes using the table below as a guide.

Recording	Usage frequency		Recording	Usage frequency
time mode	(Using T-120)	(Using T-160)	time mode	(Using T-120)	(Using T-160)
SPA2	100	50	EP48	8	4
EPA6	100	50	SP72	7	3
SPA12	40	20	EP72	5	2
EPA18	20	10	SP120	4	2
SPA24	20	10	EP120	3	1

SP24	20	10	SP168	3	1

EP30	12	6	EP168	2	1
SP48	10	5	SPL01 ~ SPL03	1

NOTICE

46

Image 47

Contents Instruction Manual Please Read Important PrecautionsUnplug this product from the wall Important Safety InstructionsPower Sources Radiators, heat registers, stovesTo restore the product to its normal operation AccessoriesPower Lines When the power-supply cord or plug is damagedTable of Contents FeaturesFront Panel Instructions in BriefDisplay button Time Mode / SET + buttonsTape Remain button Cassette CompartmentRear Panel Removal Word on the Exclusive 3N-100AAS Battery PackSpecification of Battery InstallationVCR Display FF button REW buttonPress to start play back Connection with a Video Camera ConnectionsOutput Typical Connection with the Sequential SwitcherVideo To REC TRIGG. OUTContents of Screen Display Alarm Recall Screen Operation Setting the ClockMonitor screen ON-SCREEN FunctionsDate-Time Display VCR displayDisplay Screen This function enables to indicate and record information Alarm numberIs pressed. When an alarm is Changes to the alarm numberCounter Memory Alarm MemoryCounter Displays Code Number Condition of Abnormality Error MessageTape Remain A18 20s Fields/s Possible Continuous Virtual Real Time mode Setting the RECORDING/PLAYBACK TimeHOW to Operate 24 Hour Virtual Real Time Mode Unloading a Cassette Loading and Unloading a Video CassetteLoading a cassette Camera and monitor TV RecordingRestart Recording Setting the Restart RecordingProgram Screen Timer RecordingSetting the Timer Program Daily Timer RecordingDuring timer power off mode, alarm recording will not Time Mode button is pressed, the displayPower goes off and the Timer display lights Should be more than 1 minute. If they are same, timerPress the Shift Button to blink the MO1 start time Weekly Timer RecordingPress the Shift ButtonGRAM.to blink PRO DLY Overlapping ProgramsExample FR2Event Recording Alarm RecordingOperation at Alarm Input Alarm Recall DisplayConnecting the Alarm Terminals Manual Setting the Alarm RecordingDisplay Recording time ContAuto recording Connecting the External control terminalAuto Recording Operation of Auto RecordingPress the + or SET How to release Auto RecordingHow to forbid Auto Recording Press Timer button to release the timer modeDisplay Operation after detection of tape end How to Set to Stop at End of TapeSetting contents Buzzer Screen display Counter display Operation After Tape END DetectionMenu Screen How to Set to Auto Rewind at End of TapeAlarm recording does not operate during auto-rewind ButtonREC. to select REW → How to Set to Repeat Record at End of TapeC D a B C D Recording with the Sequential SwitcherConnection with the Sequential Switcher Timing for Camera SwitchingREC Trigger Output Selection in the Alarm Recording Playback Tracking AdjustmentRecording time mode Time mode for playback Slow Still Play Using the Shuttle DialREW Stop Picture Search PlayPlayback in Various Modes Search Operation Time Date SearchPress the Counter Memory button twice to make Alarm SearchAlarm M to light Still picture mode Press the Play buttonInput/Output Terminal Signal level Additional remarks Signal Levels of INPUT/OUTPUT TerminalsOrder of Daily Checks Check the playback picture recorded in SPA2 modePress the or Time Mode button to go to SPA2 mode Daily and Periodic InspectionTape Usage Frequency Recording Usage frequency Time modeSteps to Take after Daily Checks Request for Periodic ChecksDew Condensation Recording Before Calling Service PersonnelInstallation Function/OperationOther matters PlaybackDew caution sheet SpecificationsConnector section Accessories70971825 Limited Warranty