Toshiba kV-9168A Operation After Tape END Detection, How to Set to Stop at End of Tape

Page 35

OPERATION AFTER TAPE END DETECTION

The VCR can be programmed to respond differently when the tape reaches its end. The following describes how to set the different modes of operation.

How to Set to Stop at End of Tape

INTRODUCTION

Press the DISPLAY

1 button.

DISPLAY – TIME MODE +

SET

SHIFT	TRACKING
SHIFT
	LOCATION SELECT

M E N U

CLOCK ADJUST SETUP DISPLAY MODE PROGRAM ALARM RECALL TIME DATE SEARCH

END=[DISPLAY]

Press the + or – SET

4 button to set the opera- tion after tape end detection.

DISPLAY – TIME MODE +

SET
SHIFT	TRACKING
SHIFT
	LOCATION SELECT

S E T U P
ALARM REC TIME	15S
SPEED	SPA 2
RESTART REC	OFF
TAPE END MODE	STOP
ALARM	STOP

MENU=[DISPLAY]

PREPARATION

Press the or SHIFT

2 button to blink SETUP and press the + SET button.

DISPLAY – TIME MODE +

SET
SHIFT	TRACKING
SHIFT
	LOCATION SELECT

M E N U

CLOCK ADJUST SETUP DISPLAY MODE PROGRAM ALARM RECALL TIME DATE SEARCH

END=[DISPLAY]

iEach time the + SET button is pressed, the display

changes as follows.

STOP → (REW → STOP) → (REW → REC)

iEach time the – SET button is pressed, the display changes in the reverse order.

Display	Operation after detection of tape end
STOP	Stops at tape end.

Press the or SHIFT

3 button to blink TAPE END MODE.

DISPLAY – TIME MODE +

SET

SHIFT	TRACKING
SHIFT
	LOCATION SELECT

S E T U P
ALARM REC TIME	15S
SPEED	SPA 2
RESTART REC	OFF
TAPE END MODE	STOP
ALARM	STOP

MENU=[DISPLAY]

	REW → STOP Rewinds to beginning of tape and stops.

	REW → REC	Set to carry out repeat recording.
	REW → REC	Rewinds to beginning of tape and records.
		Rewinds to beginning of tape and records.

Caution:

If you need Auto Rewind function even for the case that alarm recording starts during recording, please set TAPE END ALARM to “CONT.” in the MENU SCREEN.

Note:

iThe buzzer, screen display and counter displays operate as follows depending on the setting for operations after tape end detection.

Setting contents	Buzzer	Screen display	Counter display
STOP	Buzzer sounds at tape end	TAPE END blinks	Counter display blinks
REW → STOP	Buzzer sounds at tape top	TAPE END blinks	Counter display blinks
REW → REC

PLAYBACK

OPERATION

NOTICE

34

Image 35

Contents Instruction Manual Please Read Important PrecautionsUnplug this product from the wall Important Safety InstructionsPower Sources Radiators, heat registers, stovesTo restore the product to its normal operation AccessoriesPower Lines When the power-supply cord or plug is damagedTable of Contents FeaturesFront Panel Instructions in BriefDisplay button Time Mode / SET + buttonsTape Remain button Cassette CompartmentRear Panel Removal Word on the Exclusive 3N-100AAS Battery PackSpecification of Battery InstallationVCR Display FF button REW buttonPress to start play back Connection with a Video Camera ConnectionsOutput Typical Connection with the Sequential SwitcherVideo To REC TRIGG. OUTContents of Screen Display Alarm Recall Screen Operation Setting the ClockMonitor screen ON-SCREEN FunctionsDate-Time Display VCR displayDisplay Screen This function enables to indicate and record information Alarm numberIs pressed. When an alarm is Changes to the alarm numberCounter Memory Alarm MemoryCounter Displays Code Number Condition of Abnormality Error MessageTape Remain A18 20s Fields/s Possible Continuous Virtual Real Time mode Setting the RECORDING/PLAYBACK TimeHOW to Operate 24 Hour Virtual Real Time Mode Unloading a Cassette Loading and Unloading a Video CassetteLoading a cassette Camera and monitor TV RecordingRestart Recording Setting the Restart RecordingProgram Screen Timer RecordingSetting the Timer Program Daily Timer RecordingDuring timer power off mode, alarm recording will not Time Mode button is pressed, the displayPower goes off and the Timer display lights Should be more than 1 minute. If they are same, timerPress the Shift Button to blink the MO1 start time Weekly Timer RecordingPress the Shift ButtonGRAM.to blink PRO DLY Overlapping ProgramsExample FR2Event Recording Alarm RecordingOperation at Alarm Input Alarm Recall DisplayConnecting the Alarm Terminals Manual Setting the Alarm RecordingDisplay Recording time ContAuto recording Connecting the External control terminalAuto Recording Operation of Auto RecordingPress the + or SET How to release Auto RecordingHow to forbid Auto Recording Press Timer button to release the timer modeDisplay Operation after detection of tape end How to Set to Stop at End of TapeSetting contents Buzzer Screen display Counter display Operation After Tape END DetectionMenu Screen How to Set to Auto Rewind at End of TapeAlarm recording does not operate during auto-rewind ButtonREC. to select REW → How to Set to Repeat Record at End of TapeC D a B C D Recording with the Sequential SwitcherConnection with the Sequential Switcher Timing for Camera SwitchingREC Trigger Output Selection in the Alarm Recording Playback Tracking AdjustmentRecording time mode Time mode for playback Slow Still Play Using the Shuttle DialREW Stop Picture Search PlayPlayback in Various Modes Search Operation Time Date SearchPress the Counter Memory button twice to make Alarm SearchAlarm M to light Still picture mode Press the Play buttonInput/Output Terminal Signal level Additional remarks Signal Levels of INPUT/OUTPUT TerminalsOrder of Daily Checks Check the playback picture recorded in SPA2 modePress the or Time Mode button to go to SPA2 mode Daily and Periodic InspectionTape Usage Frequency Recording Usage frequency Time modeSteps to Take after Daily Checks Request for Periodic ChecksDew Condensation Recording Before Calling Service PersonnelInstallation Function/OperationOther matters PlaybackDew caution sheet SpecificationsConnector section Accessories70971825 Limited Warranty