INTRODUCTION
Setting the Alarm Recording
Press the DISPLAY
1 button.
M E N U
CLOCK ADJUST
Press the 
SHIFT button to blink SPEED and press
4 the + SET button to set the recording time mode.
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
|
SETUP DISPLAY MODE PROGRAM ALARM RECALL TIME DATE SEARCH
DISPLAY – TIME MODE +
S E T U P |
|
|
ALARM REC TIME | 15S | |
SPEED | SPA 2 |
|
RESTART REC | OFF | |
LOCATION SELECT |
END=[DISPLAY]
SET
SHIFT
TRACKING
TAPE END MODE | STOP |
ALARM | STOP |
PREPARATION
LOCATION SELECT
Press the 
SHIFT
2 button to blink SETUP and press the + SET button.
DISPLAY – TIME MODE +
M E N U
CLOCK ADJUST SETUP DISPLAY MODE PROGRAM ALARM RECALL
MENU=[DISPLAY]
i | Each time the + SET button is pressed, the display |
| changes as follows. |
| SPA2 → A6 → SPA12 → A18 → SPA24 → SPA2 |
i | Each time the – SET button is pressed, the display |
SET
SHIFT
TRACKING
TIME DATE SEARCH
changes in the reverse order. |
LOCATION SELECT
END=[DISPLAY]
Press the + SET button to set the alarm recording | |
3 time. | S E T U P |
Press the 
SHIFT button to blink TAPE END ALARM
5 and press the + SET button to set operation after tape end detection.
|
|
| ALARM REC TIME | 15S |
| – TIME MODE + | SPEED | SPA 2 | |
DISPLAY | RESTART REC | OFF | ||
| SET |
| TAPE END MODE | STOP |
|
| TRACKING | ||
| SHIFT | ALARM | STOP | |
|
| |||
|
|
| ||
|
| LOCATION SELECT | MENU=[DISPLAY] | |
|
|
| ||
i Each time the + SET button is pressed, the display |
DISPLAY – TIME MODE +
SET |
|
SHIFT | TRACKING |
| |
| LOCATION SELECT |
S E T U P |
|
|
ALARM REC TIME | 15S |
|
SPEED | SPA 2 |
|
RESTART REC | OFF |
|
TAPE END MODE | STOP |
|
ALARM | STOP |
|
MENU=[DISPLAY]
changes as follows. |
15S → 30S → 1M00S → 1M30S → 2M00S → 2M30S → |
3M00S → 6M00S → CONT. → MANUAL → 5S → 15S |
i Each time the – SET button is pressed, the display |
changes in the reverse direction. |
Display | Recording time |
5S | 5 seconds recording |
15S | 15 seconds recording |
30S | 30 seconds recording |
1M00S | 1 minute recording |
iEach time the + SET button is pressed, the display changes as follows.
→STOP → CONT. 
STOP ... Stops at tape end when any alarm condition has occurred.
CONT .. Performs an operation selected by TAPE END MODE on MENU SCREEN when tape end is detected.
PLAYBACK | OPERATION |
NOTICE
1M30S | 1 minute and 30 seconds recording |
|
2M00S | 2 minutes recording |
|
2M30S | 2 minutes and 30 seconds recording | |
|
|
|
3M00S | 3 minutes recording |
|
6M00S | 6 minutes recording |
|
CONT. | Recording to tape end |
|
MANUAL | Recording during alarm input | |
|
|
|
Press the DISPLAY
6 buttondisplay.twice to erase the
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
| |
| LOCATION SELECT |
8/28/97 THU 17:30:02SPA 2
31