Toshiba SD-W1111 specifications Audio Connector, Termination setting, Change of setting

			OD-A017-02
TOSHIBA DVD-RAM SD-W1111		‘99/06/26 Version 1.0
12.3.4 ONE LUN/TWO LUN setting
	Pin 6	Function
	Open	The drive operates in ONE LUN mode.
	Short	The drive operates in TWO LUN mode.

ONE LUN mode: The drive operates in one LUN (Logical Unit Number) for all discs to which SFF8090 Ver. 0.2 supports.

TWO LUN mode: The drive operates in the following two LUNs.

LUN = 0: CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R disc (Device type = 5)

LUN = 1: DVD-RAM disc (Device type = 7)

(LUN = 0/1 The selection of either 0 or 1 is switched according to a disc inserted.)

12.3.5 Termination setting

Pin 8	Function
Open	Termination disable.
Short	Termination enable.

When the termination enabled, the following circuit is connected to each SCSI signal.

2.85V

I/F signal 110Ω

12.3.6 Change of setting

The setting change should be carried out after turning off the power.

12.4 Audio Connector

When playing back a CD audio disc, the terminal develops the audio signal.

Pin No.	Signal
1	R
2	GND
3	GND
		1	2	3	4
4	L

Connection should be done using a connector, part number:103959-3, manufactured by AMP or equivalent one.

Page 25 Product Specification