Toshiba specifications Toshiba DVD-RAM SD-W1111

Page 31

OD-A017-02

TOSHIBA DVD-RAM SD-W1111

‘99/06/26 Version 1.0

3.First hang a disc on a disc holder in an upper and rear side of a tray, and then put the disc on disc holders in a down side of the tray.

4. Check three disc holders to confirm to the disc surely.

Page 31

Product Specification

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Toshiba Toshiba DVD-RAM SD-W1111 Precaution 10.1 15.1 Scope FeaturesExternal views and dimensions DVD-ROM Basic specifications∙ Average seek time Operating time of Seek command Mechanical specifications Power supply specificationsTemperature Reliability specificationsEnvironmental specifications Error rateStatic electricity Relative humidityVibration5 to 300 Hz AltitudeEN61000-4-6 EN61000-4-8 EN61000-4-11 9Blockdiagram Mounting MountingMounting direction Toshiba DVD-RAM SD-W1111 M3 screw Drive Frame 3.5mm Standard Bezel Front bezelLED lighting Disc is not loaded, all LED’s turn off Power supply connector Rear View and ConnectorsPin No. table of connector terminal 12.2 I/F connector Scsi connectorExternal view diagram Signal interface Verify setting Mode select headers functionsScsi ID setting Parity check settingTermination setting Audio ConnectorChange of setting Scsi command set Host interface specificationApplicable standard Read Write Disappearance of data in buffer in a write cache operation Error report in a write cache operationAutomatic sector replacement at a write operation Error generation in Read Modify Write operationToshiba DVD-RAM SD-W1111 Bare disc setting at vertical installation AccessoriesToshiba DVD-RAM SD-W1111 Toshiba DVD-RAM SD-W1111 Disc eject at emergency Rev # 0.9a Deviation ListRev #
Top Page Image Contents