Toshiba specifications Toshiba DVD-RAM SD-W1111

Page 17

OD-A017-02

TOSHIBA DVD-RAM SD-W1111

‘99/06/26 Version 1.0

10.3Notes on mounting

∙Keep more than 5mm clearance to circulate an adequate amount of air by convection around the drive and mounting metal parts.

∙Keep more than 0.8mm clearance around the top cover in order to secure absorbing shock and vibration.

Page 17

Product Specification

Image 17

Contents Toshiba Toshiba DVD-RAM SD-W1111 Precaution 10.1 15.1 Scope FeaturesExternal views and dimensions DVD-ROM Basic specifications∙ Average seek time Operating time of Seek command Mechanical specifications Power supply specificationsEnvironmental specifications Reliability specificationsError rate TemperatureVibration5 to 300 Hz Relative humidityAltitude Static electricityEN61000-4-6 EN61000-4-8 EN61000-4-11 9Blockdiagram Mounting MountingMounting direction Toshiba DVD-RAM SD-W1111 M3 screw Drive Frame 3.5mm LED lighting Front bezelStandard Bezel Disc is not loaded, all LED’s turn off Power supply connector Rear View and ConnectorsPin No. table of connector terminal 12.2 I/F connector Scsi connectorExternal view diagram Signal interface Scsi ID setting Mode select headers functionsParity check setting Verify settingChange of setting Audio ConnectorTermination setting Applicable standard Host interface specificationScsi command set Read Write Automatic sector replacement at a write operation Error report in a write cache operationError generation in Read Modify Write operation Disappearance of data in buffer in a write cache operationToshiba DVD-RAM SD-W1111 Bare disc setting at vertical installation AccessoriesToshiba DVD-RAM SD-W1111 Toshiba DVD-RAM SD-W1111 Disc eject at emergency Rev # Deviation ListRev # 0.9a