Toshiba SD-W1111 specifications External view diagram Signal interface

Page 23

OD-A017-02

TOSHIBA DVD-RAM SD-W1111

‘99/06/26 Version 1.0

12.2.2 External view diagram

12.2.3 Signal interface

Type	50 core flat cable or 25 couple stranded wire cable
Inductor size	more than AWG28
Characteristic impedance	100ohm ± 10%
Maximum cable length	3.0m

Page 23

Product Specification

Image 23

Contents Toshiba Toshiba DVD-RAM SD-W1111 Precaution 10.1 15.1 Scope FeaturesExternal views and dimensions DVD-ROM Basic specifications∙ Average seek time Operating time of Seek command Mechanical specifications Power supply specificationsTemperature Reliability specificationsEnvironmental specifications Error rateStatic electricity Relative humidityVibration5 to 300 Hz AltitudeEN61000-4-6 EN61000-4-8 EN61000-4-11 9Blockdiagram Mounting MountingMounting direction Toshiba DVD-RAM SD-W1111 M3 screw Drive Frame 3.5mm LED lighting Front bezelStandard Bezel Disc is not loaded, all LED’s turn off Power supply connector Rear View and ConnectorsPin No. table of connector terminal 12.2 I/F connector Scsi connectorExternal view diagram Signal interface Verify setting Mode select headers functionsScsi ID setting Parity check settingChange of setting Audio ConnectorTermination setting Applicable standard Host interface specificationScsi command set Read Write Disappearance of data in buffer in a write cache operation Error report in a write cache operationAutomatic sector replacement at a write operation Error generation in Read Modify Write operationToshiba DVD-RAM SD-W1111 Bare disc setting at vertical installation AccessoriesToshiba DVD-RAM SD-W1111 Toshiba DVD-RAM SD-W1111 Disc eject at emergency Rev # Deviation ListRev # 0.9a