Toshiba 42LX196 manual Using Mpeg noise reduction, Selecting the color temperature

In the Vertical Edge Enhancer field, select the mode you prefer (Off, Low, Middle, or High).

Chapter 6: Using the TV’s advanced features

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled (“grayed out”).

To select the MPEG noise reduction level:

1 Press Yand open the Video menu.

2 Highlight Advanced Picture Settings and press T.

3 Press B or b to highlight the MPEG Noise Reduction field, and then press C or c to select either Off, Low, Middle or High.

Advanced Picture Settings				ANT 1
	Dynamic Contrast		High
	CableClear		Auto
	MPEG Noise Reduction		Low
	Color Temperature		Cool
	Vertical Edge Enhancer		Middle
	Color Management
	Game Mode		Off
		Reset	Done

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Selecting the color temperature

You can change the quality of the picture by selecting from three preset color temperatures (cool, medium, and warm), as described below.

Mode Picture Quality

cool blueish

medium neutral

warm reddish

To select the color temperature:

1 Press Yand open the Video menu.

2 Highlight Advanced Picture Settings and press T.

3 In the Color Temperature field, select the mode you prefer (Cool, Medium, or Warm).

Advanced Picture Settings		ANT 1
	Dynamic Contrast	High
	CableClear	Auto
	MPEG Noise Reduction	Low
	Color Temperature	Cool
	Vertical Edge Enhancer	Middle
	Color Management
	Game Mode	Off

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Note: If you select one of the factory-set picture modes (Sports, Standard, or Movie) and then change the color temperature mode, the picture mode automatically changes to Preference in the Picture Settings menu.

Using the Vertical Edge Enhancer feature

The Vertical Edge Enhancer feature strengthens video contour.

To turn on the Vertical Edge Enhancer feature:

1 Press Yand open the Video menu.

2 Highlight Advanced Picture Settings and press T.

3

Advanced Picture Settings				ANT 1
	Dynamic Contrast		High
	CableClear		Auto
	MPEG Noise Reduction		Low
	Color Temperature		Cool
	Vertical Edge Enhancer		Middle
	Color Management
	Game Mode		On
		Reset	Done

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Note:

•Changing the setting of this item will cause the Mode to automatically change to Preference.

•When the input is changed to PC, this future is automatically set to High and grayed out in the menu.

ResetDone

54