Toshiba 42LX196 manual LED indications, LED Indication Condition Solution

Chapter 8: Troubleshooting

LED indications

The blue and red LED lights on the TV front indicate the TV’s status, as described below:

Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the red LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.

TV front

Red LED Blue LED

	LED Indication	Condition	Solution
1)	Blue is ON (solid).	The TV is operating properly.	–
2)	Red is ON (solid).	Recording is in progress.	–
3)	Red blinks three	The TV is rebooting.	Wait several seconds until the red LED stops
	times.		blinking.
4)	Blue blinks.	Fan stopped (SET).
	Red blinks.
5)	Blue is on (solid).	Fan stopped (CableCard).	Turn OFF the TV and unplug the power cord.
	Red blinks.		Plug the power cord in again and turn ON the TV.
6)	Blue blinks slowly.	Abnormal operation of BUS line.
7)	Blue blinks quickly.	Power Protect Detection.

If, after trying the solution, the problem still exists:

•In the U.S., call TACP Consumer Solutions at 1-800-631-3811.

•In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click “Home Entertainment,” and then click “Support.”

80