Toshiba 51HX83, 65HX83, 57HX83, 46HX83 owner manual From

Page 10

Connecting your TV

Connecting a DVD player or satellite receiver without component video and a VCR

This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel.

You will need:

¥two coaxial cables (three if satellite receiver is used)

¥one set of standard A/V cables (between the TV and VCR)

¥one pair of audio cables (between the TV and DVD player/ satellite receiver)

¥one S-video cable (between the TV and DVD player/satellite receiver)

Stereo VCR

	VIDEO	AUDIO
		L R
	IN from ANT OUT to TV	IN
From	IN from ANT OUT to TV
From	CH 3	OUT
	CH 3
Antenna	CH 4
Antenna

Note:

For the highest possible picture quality from a DVD player/satellite receiver without component video or DVI/HDCP, use an S-video cable. (If your DVD player/satellite receiver has component video, see page 11. If your DVD player/satellite receiver has DVI/HDCP, see page 14).

Do not connect both an S-video cable and a standard video cable to VIDEO 1 (or VIDEO 2) at the same time or the picture performance will be unacceptable.

Do not connect the DVD player/satellite receiver and VCR to the same set of A/V inputs on the TV. (See the illustrations, which show the DVD player/satellite receiver connected to VIDEO 1 on the TV, and the VCR connected to VIDEO 2 on the TV.)

TV

ANT( 75 )

ANT-1 OUT ANT-2

DVI/HDCP IN

IN

VIDEO 1 VIDEO 2	COLOR	COLOR
VIDEO 1 VIDEO 2	STREAM	STREAM
	HD-1	HD-2

	S-VIDEO	Y	Y		AUDIO
				R	L
			PB
	VIDEO			OUT	AUDIO CENTER TheaterLink
	VIDEO	PR	PR	VIDEO		CHANNEL IN
		PR	PR	VIDEO		CHANNEL IN
	L/			L/
	MONO		L	MONO	L
			L		L
	AUDIO	AUDIO	AUDIO	AUDIO	VAR	OUT
					AUDIO	OUT
					AUDIO	ON OFF
	R		R	R	R

DVD Player

		AUDIO
		OUT
		L
		R
From	S-VIDEO VIDEO
From	OUT	OUT
Satellite		Satellite Receiver
Dish		Satellite Receiver
Dish
		AUDIO
		OUT
		L
	IN from ANT	R
		R
	S-VIDEO VIDEO
	OUT	OUT

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

10

Image 10

Contents Appendix IndexSafety Precautions Dear CustomerImportant Safety Instructions InstallationService CareImportant Safety Precautions for Split Cabinet Feature Important Safety Information Introduction Using Introduction Connecting YourTV Usingthe RemoteControl Settingup YourTV TheTVÕs Features Welcome to ToshibaConnecting a VCR Connecting your TVConnecting a cable converter box Connecting a cable converter box and VCRFrom Setting your Connecting a DVD player with component video and a VCRUsingtheTVÕs Features DTV Antenna Connecting yourTV Connecting two VCRsConnecting a camcorder IntroductionConnecting a device to the DVI/HDCP input Antenna Or CableUsingtheTV’s Features Connecting an audio system Connecting an A/V receiverPreparing the remote control for use Installing the remote control batteriesUsing the Remote Control Remote Control functional key chartCBL/SAT Audio VCR TV/VCR TV/SAT Device code setup Searching and sampling the code of a deviceUsingthe RemoteControl Setting up your TV Features Using the volume lock featureOperational feature reset Appendix IndexMulti-brand remote control device codes VCRsCD players Learning about the remote control Settingup yourTV Learning about the menu systemUsing the Quick Connect Guide Changing the on-screen display language Connecting Your ControlSelecting the antenna input To program channels automatically Adding channels to the TVÕs memoryProgramming channels automatically Press z to select CH ProgramIntroduction Connecting YourTV Adding and erasing channels manuallyPress x or to enter the TheaterLink setup mode VCRUsingthe RemoteControl Accessing the TheaterLink on-screen IR device control barTo end, select END TheaterLink IR device codes AmplifiersVideo Accessory Hdtv Decoder Receivers STS Changing channels using SpeedSurf Adjusting the color convergenceChanging channels Manually adjusting the color convergence NumberSwitching between two channels using SurfLockª Adjusting the channel settingsSwitching between two channels using Channel Return Programming your favorite channelsUsing the TVÕs Features Labeling channels Press z to highlight Viewing the widescreen picture formatsSelecting the picture size Press x or to erase the channel labelIntroduction ¥ To raise the picture, press y Press x or to display the Scroll Adjustment mode¥ To lower the picture, press z Using the Auto Aspect feature 480i signals only Selecting the cinema modeUsing the TV’s Features Using the POP double-window featureButtons 0-9 Adjusting the size of the double-window Switching the main and POP picturesConnecting YourTV Usingthe RemoteControl Settingup YourTV UsingtheTV’s Features Appendix IndexUsing the programmed channel search function POP double-window aspect ratioAbout the auto favorite feature Using the favorite channel search functionSetting Your UsingtheTVÕs Features Appendix Index Entering the PIN code Using the Locks menuPress y or z to display the PIN code entering mode If you cannot remember your PIN codeSettingup YourTV UsingtheTVÕs Features Appendix Index Using the V-CHIP menuUsingthe Remote TV Rating Independent rating system for broadcastersMpaa Rating Independent rating system for movies Press x or to return to the Locks menuTo select each item Locking channelsUnlocking programs temporarily Press z or y Repeat steps 3 and 4 for other channelsLocking video inputs Press y or z to highlight Clear ALL, and then press x orIntroduction Connecting YourTV Control Using the game timerUsing the front panel lock feature Changing the PIN codeSelecting the picture mode Adjusting the pictureAdjusting the picture quality Settingup YourTV UsingtheTVÕs Features Introduction Connecting YourTV Usingthe ControlUsing the ALS ambient light sensor feature Using the flesh tone featureSelecting the Scan Velocity Modulation SVM To turn off CableClear DNRUsing Remote Settingup YourTV UsingtheTVÕs Features Selecting the color temperatureResetting your picture adjustments Selecting the display format for 480p signals onlySelecting the video input source Labeling the video input sourcesUsing the closed caption feature ¥ To view text, highlight T1, T2, T3, or T4Setting the on timer Setting the sleep timerPress Enter to start the clock To set the clockPress y or z to highlight Clock SET To display the time on-screenMuting the sound Adjusting the soundSelecting stereo/SAP broadcasts Usingthe RemoteControl Settingup YourTV TVÕs Using the WOWª surround sound featureAdjusting the sound quality Usingthe FeaturesUsing the sub-bass system SBS Resetting your audio adjustmentsTo turn off the SBS Highlight OFF in above Selecting the Audio OUT sound Turning off the built-in speakersTo turn on the built-in speakers Highlight on in above Selecting the background of the menu display Using the StableSound¨ featureTo turn off the StableSound feature Highlight OFF in above Displaying on-screen informationUnderstanding the auto power off feature Viewing the demo modeUnderstanding the last mode memory feature Specifications AppendixTroubleshooting Limited United States Warranty Limited Canada Warranty Page Page Page Index Manufactured by