Toshiba 65HX83, 57HX83 Adding channels to the TVÕs memory, Programming channels automatically

Page 28

Adding channels to the TVÕs memory

When you press Channel y or z on the TV or remote control, your TV will stop only on the channels stored in the TVÕs channel memory.

Follow the steps below and on the next page to program all active channels into the TVÕs memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and store them in its memory. After the channels are stored automatically, you can manually add or erase individual channels (see page 29).

To program channels automatically:

Note:

To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control.

Setting up your TV

1.Press MENU, and then press x or • until the SET UP menu appears.

2.Press y or z until TV/CABLE is highlighted.

3.Press x or • to highlight either TV or CABLE, depending on which you use. If you use an antenna, highlight TV; if you use cable, highlight CABLE.

SET UP
LANGUAGE	ENGL I SH
CLOCK SET	- - : - -
ANT 1 / 2	ANT1
TV / CABLE	TV / CABLE
CH PROGRAM
ADD / ERASE	ADD
QU I C K CONNECT	GU I DE
TheaterLi n k

4. Press z to select CH PROGRAM.

SET UP
LANGUAGE	ENGL I SH
CLOCK SET	- - : - -
ANT 1 / 2	ANT1
TV / CABLE	CABLE
CH PROGRAM
ADD / ERASE	ADD
QU I C K CONNECT	GU I DE
TheaterLi n k

5.Press x or • to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.

While the TV is cycling through the channels, the message ÒProgramming NowÑPlease WaitÓ appears.

6.When channel programming is complete,the message ÒCompletedÓ appears.

7.Press Channel y or z to view the programmed channels.

TV						POWER
TV
CABLE/SAT		LIGHT		SLEEP
CABLE/SAT
VCR		1			2	3
DVD		1			2	3
AUDIO1		4			5	6
AUDIO2		4			5	6
MODE
		7			8	9
PIC SIZE		+10
		+10			0
ACTION		100/			0	ENT
MENU		O	FAV		ORI
		NF			ORI	T
	I				TE	T
						HE
E						LI	AT
E						LI		E
ID						N			R
U							K
G		LE	SUB	TIT
		LE	SUB
		TIT
					LE	A
P						A
U						U
T		FAV				DI
SE		FAV				O
						O
		ENTER
		FAV
CH						VOL
		EXIT
DVD RTN		DVD CLEAR
DVD RTN
CH RTN		INPUT	RECALL			MUTE

SLOW/DIR SKIP/SEARCH

Channel

Numbers

MENU

yzx •

Channel yz

28

Image 28

Contents Appendix IndexSafety Precautions Dear CustomerImportant Safety Instructions InstallationService CareImportant Safety Precautions for Split Cabinet Feature Important Safety Information Introduction Introduction Connecting YourTV Usingthe RemoteControl Settingup YourTV TheTVÕs FeaturesUsing Welcome to ToshibaConnecting a VCR Connecting your TVConnecting a cable converter box Connecting a cable converter box and VCRFrom Setting your Connecting a DVD player with component video and a VCRUsingtheTVÕs Features DTV Antenna Connecting two VCRs Connecting a camcorderConnecting yourTV IntroductionConnecting a device to the DVI/HDCP input Antenna Or CableUsingtheTV’s Features Connecting an audio system Connecting an A/V receiverPreparing the remote control for use Installing the remote control batteriesUsing the Remote Control Remote Control functional key chartCBL/SAT Audio VCR TV/VCR TV/SAT Device code setup Searching and sampling the code of a deviceUsing the volume lock feature Operational feature resetUsingthe RemoteControl Setting up your TV Features Appendix IndexMulti-brand remote control device codes VCRsCD players Learning about the remote control Settingup yourTV Learning about the menu systemUsing the Quick Connect Guide Changing the on-screen display language Connecting Your ControlSelecting the antenna input Adding channels to the TVÕs memory Programming channels automaticallyTo program channels automatically Press z to select CH ProgramIntroduction Connecting YourTV Adding and erasing channels manuallyPress x or to enter the TheaterLink setup mode VCRUsingthe RemoteControl Accessing the TheaterLink on-screen IR device control barTo end, select END TheaterLink IR device codes AmplifiersVideo Accessory Hdtv Decoder Receivers STS Changing channels using SpeedSurf Adjusting the color convergenceChanging channels Manually adjusting the color convergence NumberAdjusting the channel settings Switching between two channels using Channel ReturnSwitching between two channels using SurfLockª Programming your favorite channelsUsing the TVÕs Features Labeling channels Viewing the widescreen picture formats Selecting the picture sizePress z to highlight Press x or to erase the channel labelIntroduction ¥ To raise the picture, press y Press x or to display the Scroll Adjustment mode¥ To lower the picture, press z Using the Auto Aspect feature 480i signals only Selecting the cinema modeUsing the TV’s Features Using the POP double-window featureButtons 0-9 Switching the main and POP pictures Connecting YourTV Usingthe RemoteControlAdjusting the size of the double-window Settingup YourTV UsingtheTV’s Features Appendix IndexUsing the programmed channel search function POP double-window aspect ratioAbout the auto favorite feature Using the favorite channel search functionSetting Your UsingtheTVÕs Features Appendix Index Using the Locks menu Press y or z to display the PIN code entering modeEntering the PIN code If you cannot remember your PIN codeUsing the V-CHIP menu Usingthe RemoteSettingup YourTV UsingtheTVÕs Features Appendix Index TV Rating Independent rating system for broadcastersMpaa Rating Independent rating system for movies Press x or to return to the Locks menuLocking channels Unlocking programs temporarilyTo select each item Press z or y Repeat steps 3 and 4 for other channelsLocking video inputs Press y or z to highlight Clear ALL, and then press x orUsing the game timer Using the front panel lock featureIntroduction Connecting YourTV Control Changing the PIN codeSelecting the picture mode Adjusting the pictureAdjusting the picture quality Introduction Connecting YourTV Usingthe Control Using the ALS ambient light sensor featureSettingup YourTV UsingtheTVÕs Features Using the flesh tone featureSelecting the Scan Velocity Modulation SVM To turn off CableClear DNRSelecting the color temperature Resetting your picture adjustmentsUsing Remote Settingup YourTV UsingtheTVÕs Features Selecting the display format for 480p signals onlySelecting the video input source Labeling the video input sourcesUsing the closed caption feature ¥ To view text, highlight T1, T2, T3, or T4Setting the on timer Setting the sleep timerTo set the clock Press y or z to highlight Clock SETPress Enter to start the clock To display the time on-screenMuting the sound Adjusting the soundSelecting stereo/SAP broadcasts Using the WOWª surround sound feature Adjusting the sound qualityUsingthe RemoteControl Settingup YourTV TVÕs Usingthe FeaturesUsing the sub-bass system SBS Resetting your audio adjustmentsTo turn off the SBS Highlight OFF in above Selecting the Audio OUT sound Turning off the built-in speakersTo turn on the built-in speakers Highlight on in above Using the StableSound¨ feature To turn off the StableSound feature Highlight OFF in aboveSelecting the background of the menu display Displaying on-screen informationUnderstanding the auto power off feature Viewing the demo modeUnderstanding the last mode memory feature Specifications AppendixTroubleshooting Limited United States Warranty Limited Canada Warranty Page Page Page Index Manufactured by