Toshiba 65HX83, 57HX83, 51HX83 Device code setup, Searching and sampling the code of a device

Page 20

Using the Remote Control

Programming the remote control for use with your audio/video devices

Device code setup

1.Refer to the multi-brand remote control device code table on pages 22Ð23 to find the code for the brand of your device.

If more than one code is listed, try each one separately until you find the one that works.

2.Press MODE until the Mode indicator for the device (CABLE/ SAT, VCR, DVD, AUDIO1, AUDIO2) lights up.

3.While holding down the RECALL button, press the Channel Number buttons to enter the four-digit code for your brand of device. If a valid code is entered, the mode indicator will blink twice. If an invalid code is entered, the mode indicator will blink one long blink.

4.Point the remote control at the device and press POWER to test the code.

If the device turns on, you have entered the correct code.

If the device does not respond to the remote control, you may have entered the wrong code. Repeat steps 3 and 4 using another code.

Note: In addition to POWER, confirm that all necessary keys on the TV remote control operate your device. If some keys are not operational, repeat the device code setup using another code (if other codes are listed for your device). If, after trying all listed codes, the necessary keys do not operate your device, use the device’s original remote control.

5. Press MODE to select the TV mode to control the TV.

Searching and sampling the code of a device (8500)

If you do not know the device code for a particular device, you can cycle the remote control through the available codes for that device mode and sample the functions to find the code that operates the target device. The keys available to be sampled, provided they are applicable to that mode, are POWER, 1, VOL y, CH y, and PLAY. Invalid keys will be ignored while in program mode.

To cycle through each available device code and sample its functions:

1.Press MODE to select the mode you want to set up.

2.While holding down the RECALL button, press 8 Ð5 Ð0 Ð0. The remote control will enter program mode.

3.Point the remote control at the target device and press POWER (or other function buttons that are available to be sampled).

4.If the device responds to the remote control:

Press RECALL to store the device code.

The mode indicator will blink twice and the remote control will exit the program mode.

If the device does not respond to the remote control: Press y, and then press POWER.

Repeat this step until the device responds to the remote control, and then press RECALL.

Note: When a search cycle is completed, the mode indicator will blink three times. The remote control will begin to cycle through the available codes again. If no key is pressed within 10 seconds while programming, the remote control will exit the program mode and return to the previous code.

Note:

•Although your new TV’s remote control includes codes for many devices, it may not include codes for some or all of the features on certain devices you wish to control. if you are unable to program the TV’s remote control to operate your device or some of the features on that device, use the device’s remote control or the controls on the device.

POWER

TV

CABLE/SAT LIGHT SLEEP POWER

VCR

 

 

 

 

 

 

 

 

 

DVD

 

1

 

 

2

3

 

Numbers

AUDIO1

 

 

 

 

 

 

 

 

AUDIO2

 

4

 

 

5

6

 

 

 

 

 

 

 

MODE

MODE

 

 

 

 

 

 

 

 

 

 

7

 

 

8

9

 

 

PIC SIZE

 

+10

 

 

 

 

 

 

 

 

 

0

 

 

 

 

ACTION

 

100/

 

 

ENT

 

 

MENU

 

O

FAV

ORI

 

 

 

 

 

NF

 

 

T

 

 

 

 

I

 

 

 

TE

 

 

 

 

 

 

 

 

 

HE

 

 

E

 

 

 

 

 

LI

AT

 

 

 

 

 

 

 

E

ID

 

 

 

 

 

N

 

R

U

 

 

 

 

 

 

K

 

 

G

 

LE

SUB

TIT

 

 

 

 

 

 

TIT

 

 

 

 

 

 

 

 

 

 

LE

A

 

 

 

P

 

 

 

 

 

 

 

 

U

 

 

 

 

 

U

 

 

 

T

 

FAV

 

 

DI

 

 

y

S

 

 

 

 

 

 

E

 

 

 

O

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENTER

 

 

 

 

 

 

 

 

FAV

 

 

 

 

 

 

CH

 

 

 

 

 

VOL

 

 

 

DVD RTN

 

EXIT

 

 

 

 

 

RECALL

 

DVD CLEAR

 

 

 

 

CH RTN

 

INPUT

RECALL

MUTE

 

 

SLOW/DIR SKIP/SEARCH

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Appendix IndexSafety Precautions Dear CustomerImportant Safety Instructions InstallationService CareImportant Safety Precautions for Split Cabinet Feature Important Safety Information Introduction Introduction Connecting YourTV Usingthe RemoteControl Settingup YourTV TheTVÕs FeaturesUsing Welcome to ToshibaConnecting a VCR Connecting your TVConnecting a cable converter box Connecting a cable converter box and VCRFrom UsingtheTVÕs Features Connecting a DVD player with component video and a VCRSetting your DTV Antenna Connecting two VCRs Connecting a camcorderConnecting yourTV IntroductionConnecting a device to the DVI/HDCP input Antenna Or CableUsingtheTV’s Features Connecting an audio system Connecting an A/V receiverPreparing the remote control for use Installing the remote control batteriesUsing the Remote Control Remote Control functional key chartCBL/SAT Audio VCR TV/VCR TV/SAT Device code setup Searching and sampling the code of a deviceUsing the volume lock feature Operational feature resetUsingthe RemoteControl Setting up your TV Features Appendix IndexMulti-brand remote control device codes VCRsCD players Learning about the remote control Settingup yourTV Learning about the menu systemUsing the Quick Connect Guide Selecting the antenna input Connecting Your ControlChanging the on-screen display language Adding channels to the TVÕs memory Programming channels automaticallyTo program channels automatically Press z to select CH ProgramIntroduction Connecting YourTV Adding and erasing channels manuallyPress x or to enter the TheaterLink setup mode VCRTo end, select END Accessing the TheaterLink on-screen IR device control barUsingthe RemoteControl TheaterLink IR device codes AmplifiersVideo Accessory Hdtv Decoder Receivers STS Changing channels Adjusting the color convergenceChanging channels using SpeedSurf Manually adjusting the color convergence NumberAdjusting the channel settings Switching between two channels using Channel ReturnSwitching between two channels using SurfLockª Programming your favorite channelsUsing the TVÕs Features Labeling channels Viewing the widescreen picture formats Selecting the picture sizePress z to highlight Press x or to erase the channel labelIntroduction ¥ To lower the picture, press z Press x or to display the Scroll Adjustment mode¥ To raise the picture, press y Using the Auto Aspect feature 480i signals only Selecting the cinema modeButtons 0-9 Using the POP double-window featureUsing the TV’s Features Switching the main and POP pictures Connecting YourTV Usingthe RemoteControlAdjusting the size of the double-window Settingup YourTV UsingtheTV’s Features Appendix IndexUsing the programmed channel search function POP double-window aspect ratioSetting Your UsingtheTVÕs Features Appendix Index Using the favorite channel search functionAbout the auto favorite feature Using the Locks menu Press y or z to display the PIN code entering modeEntering the PIN code If you cannot remember your PIN codeUsing the V-CHIP menu Usingthe RemoteSettingup YourTV UsingtheTVÕs Features Appendix Index TV Rating Independent rating system for broadcastersMpaa Rating Independent rating system for movies Press x or to return to the Locks menuLocking channels Unlocking programs temporarilyTo select each item Press z or y Repeat steps 3 and 4 for other channelsLocking video inputs Press y or z to highlight Clear ALL, and then press x orUsing the game timer Using the front panel lock featureIntroduction Connecting YourTV Control Changing the PIN codeAdjusting the picture quality Adjusting the pictureSelecting the picture mode Introduction Connecting YourTV Usingthe Control Using the ALS ambient light sensor featureSettingup YourTV UsingtheTVÕs Features Using the flesh tone featureSelecting the Scan Velocity Modulation SVM To turn off CableClear DNRSelecting the color temperature Resetting your picture adjustmentsUsing Remote Settingup YourTV UsingtheTVÕs Features Selecting the display format for 480p signals onlySelecting the video input source Labeling the video input sourcesUsing the closed caption feature ¥ To view text, highlight T1, T2, T3, or T4Setting the on timer Setting the sleep timerTo set the clock Press y or z to highlight Clock SETPress Enter to start the clock To display the time on-screenSelecting stereo/SAP broadcasts Adjusting the soundMuting the sound Using the WOWª surround sound feature Adjusting the sound qualityUsingthe RemoteControl Settingup YourTV TVÕs Usingthe FeaturesTo turn off the SBS Highlight OFF in above Resetting your audio adjustmentsUsing the sub-bass system SBS To turn on the built-in speakers Highlight on in above Turning off the built-in speakersSelecting the Audio OUT sound Using the StableSound¨ feature To turn off the StableSound feature Highlight OFF in aboveSelecting the background of the menu display Displaying on-screen informationUnderstanding the last mode memory feature Viewing the demo modeUnderstanding the auto power off feature Specifications AppendixTroubleshooting Limited United States Warranty Limited Canada Warranty Page Page Page Index Manufactured by

46HX83, 57HX83, 51HX83, 65HX83 specifications

The Toshiba HX83 series presents a collection of high-quality televisions, including the 65HX83, 51HX83, 57HX83, and 46HX83 models, designed to meet a diverse range of viewing preferences and spaces. These TVs are equipped with a variety of advanced features and technologies that enhance the overall viewing experience.

At the heart of the HX83 series is Toshiba’s 4K Ultra HD resolution, offering four times the number of pixels found in Full HD. This advanced resolution provides stunning clarity and detail, ensuring that every scene is rendered with remarkable precision. The integration of HDR (High Dynamic Range) technology allows for a broader color spectrum and improved contrast, delivering more vibrant colors and deeper blacks. Whether watching movies, playing video games, or streaming content, viewers are treated to a lifelike picture quality that immerses them in the action.

The Toshiba HX83 models are equipped with Sound by DTS Virtual:X technology, which elevates the audio experience by providing virtual surround sound. This technology simulates an immersive audio environment, making dialogues crisper and effects more powerful without the need for external speakers. Coupled with their sleek designs, these TVs can seamlessly fit into any living space.

Smart TV functionality is another key feature of the HX83 series. These models operate on the Toshiba Smart TV platform, which offers access to a wide array of streaming services, apps, and content. Viewers can easily navigate platforms like Netflix, Amazon Prime Video, and YouTube, making it easier than ever to enjoy their favorite shows and movies. The TVs also support screen mirroring, allowing users to share content from their smartphones or tablets directly onto the larger screen.

Connectivity options are ample, with multiple HDMI and USB ports available, ensuring compatibility with various devices such as gaming consoles, Blu-ray players, and soundbars. Additionally, built-in Wi-Fi facilitates seamless internet connectivity for smooth streaming and browsing.

In summary, the Toshiba 65HX83, 51HX83, 57HX83, and 46HX83 TVs are designed for those who seek a combination of advanced display technology, superior sound, and smart functionalities. The blend of 4K resolution, HDR capabilities, and DTS Virtual:X sound creates a compelling entertainment experience that redefines home viewing.
Top Page Image Contents