Toshiba Flat Panel Television owner manual Changing channels, Adding and erasing channels manually

Adding and erasing channels manually

After you have automatically programmed the active channels into the TV's channel memory, you can manually add or erase specific channels.

To add or erase channels:

1.Select the channel you want to add or erase, tfyou are adding a

channel, you must select the channel using the Channel Number buttons.

2.Press MENU, and then press • or • until the SET UP menu appears.

3.Press • or • to highlight ADD/ERASE.

LANGUAGEENGLISH

ANTI/2ANTI

4.Press • or • to select ADD or ERASE, depending on the function you want to perform.

5.Repeat steps 1-4 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:

Press Channel • or • on the TV or remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100).

For channels 100 and higher, press the 100 button, and then the next two numbers. For example, to select channel 125, press 100, 2, 5.

Changing channels using SpeedSurf

To change to a specific programmed channel using SpeedSurfi Press and hold Channel • or • for about one second. The TV will enter the SpeedSurf mode.

Upper channels

t

Current channel

Lower channels

Channel label (if set)

Repeatedly press or hold Channel • or • while the SpeedSurf mode is on-screen to scroll the channel list. Release the button to

display the highlighted channel.

IIEII

:_

TV front panel

MENU _1•TA

Channel TA

Channel

Number

MENU

31