Toshiba Flat Panel Television Selecting the Audio OUT sound, Using the StableSound feature

Selecting the Audio OUT sound

This feature allows you to select the sound source (MAIN or POP) that is output from the AUDIO OUT terminals.

Tl_is is useful when amplifying or recording the POP sound with external equipment while hearing tile sound of the main picture through the built-in speakers. See "Connecting an audio system" on page 18.

To select the Audio OUT sound:

1.Press MENU, and then press • or • until the AUDIO menu appears.

2.Press • or • to highlight AUDIO OUT.

3.Press • or • to select MAIN or POP.

_AUDEO

_sON

_BS LEVEL100

•MAIN: Outputs the sound of the main program through the AUDIO OUT terminals.

•POP: Outputs the sound of the POP program through the AUDIO OUT terminals.

Using the StableSound _ feature

The StableSound ® feature limits he highest volume level to prevent extreme changes in volume when the signal source is changed (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial).

To turn on the StabieSound ® feature:

1.Press MENU, and then press • or • until the AUDIO menu appears.

2.Press • or • to highlight STABLE SOUND.

3.Press • or • to select ON.

_SOtq

To turn off the StableSound _'feature:

Highlight OFF in step 3 above.

EEl

Note:

Make sure the volume control of your audio ampD#er*sset to a moderate hstening/eveZ

MENU

-- A'_411b

Note:

When the POPis not on the screen,the sound of the maio program is ou_ouz,even if the POP sound is selected

59