Connecting a DTV
This connection allows you to watch DTV (digital TV broadcast), VCR, and TV programs, and record DTV and TV programs. You can
record from one source while watching a program from another source.
Your TV has ColorStream ® (component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism.
You will need:
•three coaxial cables
•two sets of standard A/V cables
•one set of component video cables
•one pair of standard audio cables
From
Antenna Stereo VCR
From
DTV Antenna
Note:
For the highest possiblepicture quality,use component video cables Cora DVl D digital single link cable] between the TVand DTV
receiveL
Youcan connect component video cables from the DTV receiver to either set of CelorStream terminals on the TV CHD I or HD 2].
The ColorStream HD l and HD_ terminals can be used with ProgressiveC480p,720p] and Interlaced C480_lO80i) seansystems.
#your DTV receiveris not compatible
wi_l component video CorDVI/HDCP], use an S video cable Cplusan audio connection] insteac_
Torecord from the DTV receiver,set the VCR to Line IN. Tomonitor recording from the DTV receiver,set the VCRto Line IN and the 7V to
VIDEO 1
Theunauthorizedrecording, use, distribution, I or revision of televisionprograms, videotapes, ] DVDs, andother materials is prohibitedunder ]
the CopyrightLawsof the UnitedStates and ] othercountries,and may subjectyonto civil ]
andcriminal liability. | I |
14