Toshiba Flat Panel Television owner manual Switching the main and POP pictures

Switching the main and POP pictures

Press SWAP while you are using the POP feature to switch the main and POP pictures.

Freezing the POP picture

1.Press FREEZE while the POP is not on the screen. The POP window will appear with a still picture.

2.Press FREEZE again to renew the still picture.

EXIT

WAP

I

To erase the still POP window:	Still picture
Press EXIT.

Adjusting the size of the double-window

When the input signals of the main and POP pictures are 480i, you can adjust the size of each window. Continuously pressing _1or • changes the size in 9 steps.

<

Note:

If the signal format other than 4801is received, this feature is not available "Not

available" will appear on the screen.

II

<II•

NOTICE OF POSSIBLE ADVERSE

EFFECTS ON Plasma display

Avoid displaying stationary images on your Plasmadisplay for extended periods of time. Fixed (non-moving) images (such as still PIP/POPwindows or blacW gray bars in 4:3 screen picture or PiP/ POP formats) can become permanently engrained in the Plasmadisplay.This

type of damage is NOT COVERED BY YOUR WARRANTY because it is the

result of misuse.See item 33 on page 4.

4O