Toshiba 1405-S152, 1405-S151 Disconnect the touch pad Sumi card from CN1 on the touch pad

Page 12

Satellite 1400 Series Disassembly Overview, cont.

To remove the touch pad, follow the steps below.

1. Disconnect the touch pad SUMI card from PJ2004 on the system board.

2. Remove one M2x5 silver thin flat-head screw securing the touch pad.

3. LIft out the touch pad.

4. Disconnect the touch pad SUMI card from CN1 on the touch pad.

!

To remove the battery board, follow the steps below.

1. Disconnect the battery cable from PJ8810.

2. Lift out the battery board.

3. Disconnect the battery cable from PJ8811 on the battery board, if neces- sary.

NOTE: On installation, be sure to route the battery cable under the battery board to avoid pinching the battery cable with the plastic cover.

!

To remove the HDD connector board, follow the steps below.

1. Remove two M2x5 silver thin flat-head screws securing the HDD connector board.

2. Carefully lift up the HDD connector board to disconnect it from PJ2000 on the system board.

3. Lift out the HDD connector board.

Toshiba TRR

Page 12

7/02, Satellite

Image 12

Contents Weight 1400-S151 1400-S152 PS140U-027XF71405-S151 1405-S152 PS140U-027XFX PS140U-027XF3Satellite 1400 Series Exploded Upper View Satellite 1400 Series Exploded Lower View Satellite 1400 Series Part Numbers Ref. # Code DescriptionComments Satellite 1400 Series Part Numbers, Ref. # Code Description PIR CommentsC1Y6 TOSH4 BAG Accessory CPU HolderCPU Stud Hexa StudSatellite 1400 Series Disassembly Overview Satellite 1400 Series Disassembly Overview, Remove one M2.5x4 black flat-head screwRemove two M2x4 super flat screws securing the MDC Thirteen M2.5x6 black flat-head Six M2.5x5 black flat-head Remove two M2.5x2.6 black flat-head screwsRemove two M2.5x6 black screws and two M2.5x16 black screws To remove the optical disk drive, follow the steps below Lift out the HDD connector board Disconnect the touch pad Sumi card from CN1 on the touch padRemove the CD switch board from the front cover assembly One M2.5x6 One M2.5x14 Satellite 1400 Series Disassembly Overview, To remove the CPU, follow the steps below Images on the next Remove two M2.5x6 tapping screws securing the metal plate Remove one M2.5x6 tapping screw securing the metal braceSatellite 1400 Series Interrupts / Memory Map Interrupt Level Assigned toSatellite 1400 Series Input/Output Port Assignments Port address Device/functionVGA