Toshiba 1405-S152, 1405-S151 specifications One M2.5x6 One M2.5x14

Page 14

Satellite 1400 Series Disassembly Overview, cont.

To remove the DC-IN cable, follow the steps below.

1. Remove two M2.5x6 black flat-head screws securing the plastic brace.

2. Remove the plastic brace.

3. Disconnect the DC-IN cable from PJ8800 on the system board.

4. Remove the DC-IN cable.

!

!

To remove the cooling fan, follow the steps below.

1.Remove two M2x6 screws securing the metal brace.

2.Remove the metal brace.

3.Disconnect the power cable from PJ8770 (S2400) or PJ770 (S1400) on the system board.

4.Remove one M2.5x4 black flat-head screw securing the cooling fan module.

5.Remove the cooling fan module.

6.Remove the heat sink unit, if necessary.

"

To remove the system board, follow the steps below.

1. Remove three M2.5x6 black flat-head screws securing the system board.

2. Remove the following two stud screws:

One M2.5x6

One M2.5x14

3. Lift up the system board from the right side and remove it with the RJ-45 jack.

!

Toshiba TRR

Page 14

7/02, Satellite

Image 14
Contents 1405-S151 1405-S152 PS140U-027XFX Weight1400-S151 1400-S152 PS140U-027XF7 PS140U-027XF3Satellite 1400 Series Exploded Upper View Satellite 1400 Series Exploded Lower View Comments Satellite 1400 Series Part NumbersRef. # Code Description Satellite 1400 Series Part Numbers, Ref. # Code Description PIR CommentsCPU Stud C1Y6 TOSH4 BAG AccessoryCPU Holder Hexa StudSatellite 1400 Series Disassembly Overview Satellite 1400 Series Disassembly Overview, Remove one M2.5x4 black flat-head screwRemove two M2x4 super flat screws securing the MDC Remove two M2.5x6 black screws and two M2.5x16 black screws Thirteen M2.5x6 black flat-head Six M2.5x5 black flat-headRemove two M2.5x2.6 black flat-head screws To remove the optical disk drive, follow the steps below Lift out the HDD connector board Disconnect the touch pad Sumi card from CN1 on the touch padRemove the CD switch board from the front cover assembly One M2.5x6 One M2.5x14 Satellite 1400 Series Disassembly Overview, To remove the CPU, follow the steps below Images on the next Remove two M2.5x6 tapping screws securing the metal plate Remove one M2.5x6 tapping screw securing the metal braceSatellite 1400 Series Interrupts / Memory Map Interrupt Level Assigned toVGA Satellite 1400 Series Input/Output Port AssignmentsPort address Device/function