Toshiba 1405-S152, 1405-S151 specifications Images on the next

Page 17

Satellite 1400 Series Disassembly Overview, cont.

To remove the display mask, follow the steps below.

1. Remove two mask seals at the bottom corners of the display assembly.

2. Remove two M2.5x6 flat-head screws.

3. Release twenty-one latches on the display mask as follows:

Five on the bottom

Five on each side

Six on the top

!

!

To remove the FL inverter board, follow the steps below.

1.Remove one M2x4 flat-head screw securing the FL inverter board.

2.Rotate the FL inverter board out and disconnect the FL cable from CN1 on the FL inverter board.

3.Disconnect the HV cable from CN2 on the FL inverter board.

4.Remove the FL inverter board.

To remove the LCD module, follow the steps below.

1.Remove four masking seals that cover the screws.

2.Remove four M2x4 screws securing the LCD module.

3.Carefully rotate the top of the LCD module out to access the LCD/FL cable.

4.Remove the tape securing the LCD/FL cable.

5.Disconnect the LCD/FL cable.

6.Remove the LCD module.

7.Remove four silver super flat-head M2x3 screws securing two metal braces.

!

Images continued on the next page

Toshiba TRR

Page 17

7/02, Satellite

Image 17
Contents 1400-S151 1400-S152 PS140U-027XF7 Weight1405-S151 1405-S152 PS140U-027XFX PS140U-027XF3Satellite 1400 Series Exploded Upper View Satellite 1400 Series Exploded Lower View Comments Satellite 1400 Series Part NumbersRef. # Code Description Ref. # Code Description PIR Comments Satellite 1400 Series Part Numbers,CPU Holder C1Y6 TOSH4 BAG AccessoryCPU Stud Hexa StudSatellite 1400 Series Disassembly Overview Remove one M2.5x4 black flat-head screw Satellite 1400 Series Disassembly Overview,Remove two M2x4 super flat screws securing the MDC Remove two M2.5x6 black screws and two M2.5x16 black screws Thirteen M2.5x6 black flat-head Six M2.5x5 black flat-headRemove two M2.5x2.6 black flat-head screws To remove the optical disk drive, follow the steps below Disconnect the touch pad Sumi card from CN1 on the touch pad Lift out the HDD connector boardRemove the CD switch board from the front cover assembly One M2.5x6 One M2.5x14 Satellite 1400 Series Disassembly Overview, To remove the CPU, follow the steps below Images on the next Remove one M2.5x6 tapping screw securing the metal brace Remove two M2.5x6 tapping screws securing the metal plateInterrupt Level Assigned to Satellite 1400 Series Interrupts / Memory MapVGA Satellite 1400 Series Input/Output Port AssignmentsPort address Device/function