Toshiba 1405 Satellite 1400 Series Disassembly Overview, Remove one M2.5x4 black flat-head screw

Page 8

Satellite 1400 Series Disassembly Overview, cont.

To remove an optional SD card, follow the steps below.

1. Turn the computer right side up.

2. Push the SD card in and release it to pop the card out slightly.

3. Grasp the SD card and remove it.

To remove the HDD, follow the steps below.

1. Turn the computer upside down.

2. Remove one M2.5x4 black flat-head screw securing the HDD cover.

3. Lift off the HDD cover.

4. Pull the guide to remove the HDD. Be careful not to damage the connector.

5. Place the HDD pack on a flat surface and remove four M2x4 silver flat-head screws.

6. Remove the HDD bracket.

CAUTION: Do not apply pressure to the top or bottom of the HDD.

To remove a memory module, follow the steps below.

1. Turn the computer upside down.

2. Remove one M2.5x4 black flat-head screw.

3. Lift off the memory slot cover.

4. Gently press out on two latches. One end of the memory module will pop up.

5. Grasp the memory module and remove it.

CAUTION: Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory.

Do not touch the connectors on the memory module(s) or on the computer. Debris on the connectors may cause memory access problems.

Toshiba TRR

Page 8

7/02, Satellite

Image 8
Contents Weight 1400-S151 1400-S152 PS140U-027XF71405-S151 1405-S152 PS140U-027XFX PS140U-027XF3Satellite 1400 Series Exploded Upper View Satellite 1400 Series Exploded Lower View Comments Satellite 1400 Series Part NumbersRef. # Code Description Satellite 1400 Series Part Numbers, Ref. # Code Description PIR CommentsC1Y6 TOSH4 BAG Accessory CPU HolderCPU Stud Hexa StudSatellite 1400 Series Disassembly Overview Satellite 1400 Series Disassembly Overview, Remove one M2.5x4 black flat-head screwRemove two M2x4 super flat screws securing the MDC Remove two M2.5x6 black screws and two M2.5x16 black screws Thirteen M2.5x6 black flat-head Six M2.5x5 black flat-headRemove two M2.5x2.6 black flat-head screws To remove the optical disk drive, follow the steps below Lift out the HDD connector board Disconnect the touch pad Sumi card from CN1 on the touch padRemove the CD switch board from the front cover assembly One M2.5x6 One M2.5x14 Satellite 1400 Series Disassembly Overview, To remove the CPU, follow the steps below Images on the next Remove two M2.5x6 tapping screws securing the metal plate Remove one M2.5x6 tapping screw securing the metal braceSatellite 1400 Series Interrupts / Memory Map Interrupt Level Assigned toVGA Satellite 1400 Series Input/Output Port AssignmentsPort address Device/function