Toshiba 1405-S151, 1405-S152 Remove the CD switch board from the front cover assembly

Page 13

Satellite 1400 Series Disassembly Overview, cont.

To install the HDD connector board, follow the steps below.

1. Seat the HDD connector board and carefully connect it to PJ2000 on the system board.

2. Secure the HDD connector board with two M2x5 silver thin flat-head screws.

3. Lift out the HDD connector board.

CAUTION: Be careful not to damage or pinch the FDD SUMI card when you seat the HDD connec- tor board. Be sure the wireless LAN switch is in the correct position.

To remove the RTC battery, follow the steps below.

1. Disconnect the RTC battery cable from PJ9999 on the sound board.

2. Lift out the RTC battery.

To remove the sound board, follow the steps below.

1. Disconnect the sound SUMI card from PJ7100 and PJ7101 on the sound board.

2. Disconnect the CD switch board SUMI card from PJ7102 on the sound board.

3. Remove one M2.5x4 screw securing the sound board.

4. Lift up the sound board.

To remove the CD switch board, follow the steps below.

1. Remove four M2.5x4 black flat-head screws securing the front cover assembly.

2. Remove the front cover assembly.

3. Remove the CD SUMI card from PJ7300 on the CD switch board.

4. Remove two M2.5x4 black flat-head screws securing the CD switch board.

5. Remove the CD switch board from the front cover assembly.

!

Toshiba TRR

Page 13

7/02, Satellite

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 1400-S151 1400-S152 PS140U-027XF7 Weight1405-S151 1405-S152 PS140U-027XFX PS140U-027XF3Satellite 1400 Series Exploded Upper View Satellite 1400 Series Exploded Lower View Ref. # Code Description Satellite 1400 Series Part NumbersComments Ref. # Code Description PIR Comments Satellite 1400 Series Part Numbers,CPU Holder C1Y6 TOSH4 BAG AccessoryCPU Stud Hexa StudSatellite 1400 Series Disassembly Overview Remove one M2.5x4 black flat-head screw Satellite 1400 Series Disassembly Overview,Remove two M2x4 super flat screws securing the MDC Remove two M2.5x2.6 black flat-head screws Thirteen M2.5x6 black flat-head Six M2.5x5 black flat-headRemove two M2.5x6 black screws and two M2.5x16 black screws To remove the optical disk drive, follow the steps below Disconnect the touch pad Sumi card from CN1 on the touch pad Lift out the HDD connector boardRemove the CD switch board from the front cover assembly One M2.5x6 One M2.5x14 Satellite 1400 Series Disassembly Overview, To remove the CPU, follow the steps below Images on the next Remove one M2.5x6 tapping screw securing the metal brace Remove two M2.5x6 tapping screws securing the metal plateInterrupt Level Assigned to Satellite 1400 Series Interrupts / Memory MapPort address Device/function Satellite 1400 Series Input/Output Port AssignmentsVGA
Top Page Image Contents