Toshiba 1405-S151, 1405-S152 specifications Satellite 1400 Series Disassembly Overview

Page 7

Satellite 1400 Series Disassembly Overview

The information offered in this section is an overview of the Maintenance Manual, Chapter 4, Replacement Procedures. If you have any questions or concerns regarding the proper procedure please refer to the Mainte- nance Manual through the Toshiba Service and Support Website before you proceed.

This section explains how to remove Field Replaceable Units (FRUs). It may not be neces- sary to remove all the FRUs in order to replace one.

The chart is a guide to which FRUs need to be removed in order to remove others. The section numbers on the chart refer to the sections in the Maintenance Manual, Chapter 4.

Always start by removing the battery pack, next, optional items such as the optional PC card and optional memory module, then follow the line on the chart to determine which FRU you must remove next in order to repair the one you think is causing the computer to operate improperly.

To remove the battery, follow the steps below.

CAUTION: When handling battery packs, be careful not to short circuit the terminals. Also do not drop, hit or otherwise apply impact; do not scratch or break the casing.

1. Turn the computer upside down.

2. Slide the battery latch to the left to release it, then pull the battery cover slightly forward and lift it out.

3. Lay the battery cover upside down. Push the latches to the outside and lift out the battery pack.

NOTE: For environmental reasons, do not throw away a spent battery pack. Please follow local ordinances or regulations for its disposal.

To remove an optional PC card, follow the steps below.

1. Turn the computer right side up.

2. Press the eject button for the PC card you want to remove, it will extend slightly.

3. Press the button again.

4. Grasp the PC card and remove it.

Toshiba TRR

Page 7

7/02, Satellite

Image 7
Contents PS140U-027XF3 Weight1400-S151 1400-S152 PS140U-027XF7 1405-S151 1405-S152 PS140U-027XFXSatellite 1400 Series Exploded Upper View Satellite 1400 Series Exploded Lower View Ref. # Code Description Satellite 1400 Series Part NumbersComments Ref. # Code Description PIR Comments Satellite 1400 Series Part Numbers,Hexa Stud C1Y6 TOSH4 BAG AccessoryCPU Holder CPU StudSatellite 1400 Series Disassembly Overview Remove one M2.5x4 black flat-head screw Satellite 1400 Series Disassembly Overview,Remove two M2x4 super flat screws securing the MDC Remove two M2.5x2.6 black flat-head screws Thirteen M2.5x6 black flat-head Six M2.5x5 black flat-headRemove two M2.5x6 black screws and two M2.5x16 black screws To remove the optical disk drive, follow the steps below Disconnect the touch pad Sumi card from CN1 on the touch pad Lift out the HDD connector boardRemove the CD switch board from the front cover assembly One M2.5x6 One M2.5x14 Satellite 1400 Series Disassembly Overview, To remove the CPU, follow the steps below Images on the next Remove one M2.5x6 tapping screw securing the metal brace Remove two M2.5x6 tapping screws securing the metal plateInterrupt Level Assigned to Satellite 1400 Series Interrupts / Memory MapPort address Device/function Satellite 1400 Series Input/Output Port AssignmentsVGA