Toshiba 1405-S152, 1405-S151 Remove two M2.5x6 tapping screws securing the metal plate

Page 18

Satellite 1400 Series Disassembly Overview, cont.

" "

!

!

To remove the antenna coaxial cables, follow the steps below.

1.Remove two M2.5x6 tapping screws securing the metal plate.

2.Remove the metal plate and the plastic brace.

3.Slip tweezers into the side of the plastic brace and pry to release two latches and remove the bottom part of the plastic brace.

4.Remove the tape securing the wireless LAN antenna coaxial cables.

5.Free the wireless LAN antenna coaxial cables from their guides and remove them.

To remove the LCD/FL cable, follow the steps below.

1.Remove two M2.5x6 tapping screws securing the metal plate.

2.Remove the metal plate and the plastic brace.

3.Remove one M2.5x6 tapping screw securing the metal brace.

4.Remove the LCD/FL cable.

NOTE: When you remove the top cover, hold it by the sides close to the hinges to prevent damage.

"

Toshiba TRR

Page 18

7/02, Satellite

Image 18
Contents 1405-S151 1405-S152 PS140U-027XFX Weight1400-S151 1400-S152 PS140U-027XF7 PS140U-027XF3Satellite 1400 Series Exploded Upper View Satellite 1400 Series Exploded Lower View Satellite 1400 Series Part Numbers Ref. # Code DescriptionComments Satellite 1400 Series Part Numbers, Ref. # Code Description PIR CommentsCPU Stud C1Y6 TOSH4 BAG AccessoryCPU Holder Hexa StudSatellite 1400 Series Disassembly Overview Satellite 1400 Series Disassembly Overview, Remove one M2.5x4 black flat-head screwRemove two M2x4 super flat screws securing the MDC Thirteen M2.5x6 black flat-head Six M2.5x5 black flat-head Remove two M2.5x2.6 black flat-head screwsRemove two M2.5x6 black screws and two M2.5x16 black screws To remove the optical disk drive, follow the steps below Lift out the HDD connector board Disconnect the touch pad Sumi card from CN1 on the touch padRemove the CD switch board from the front cover assembly One M2.5x6 One M2.5x14 Satellite 1400 Series Disassembly Overview, To remove the CPU, follow the steps below Images on the next Remove two M2.5x6 tapping screws securing the metal plate Remove one M2.5x6 tapping screw securing the metal braceSatellite 1400 Series Interrupts / Memory Map Interrupt Level Assigned toSatellite 1400 Series Input/Output Port Assignments Port address Device/functionVGA