Hooking Up the Audio Components
Connect the Super Audio CD player to an audio component. Be sure to turn off the power of all components before making connections and connect securely to prevent noise.
When you have an amplifier equipped with the 5.1CH input jacks
For normal playback, connect the player and an amplifier via ANALOG 2CH OUT jacks.
Connecting via ANALOG 5.1CH OUT jacks
Use audio connecting cords for this connection. Connect the ANALOG 5.1CH OUT jacks (FRONT L/R, SURR L/R, CENTER, SUBWOOFER) to the corresponding jacks of your amplifier. For FRONT or SURR connection, use the connecting cords (Red and White jacks) and be sure to match the
ANALOG | DIGITAL(CD) | |
2CH OUT | 5.1CH OUT | OUT |
FRONT | SURR CENTER | COAXIAL OPTICAL |
L |
|
L |
|
R |
|
R | SUB |
FRONT or SURR connection
Audio connecting cords (Red and White) (supplied)
White (L) | White (L) |
Red (R) | Red (R) |
CENTER or SUB WOOFER connection
Audio connecting cords (Black) (supplied)
Black
Black
Notes
•When you make the
•During playback of a conventional CD or a 2CH Super Audio CD, the same signal that is output from the ANALOG 2CH OUT jacks is also output from the ANALOG 5.1CH FRONT L/ R jacks.
•During playback of a
•There are 5CH, 4CH, and 3CH Super Audio CD. When you play these disc, the signal does not output from all the jacks of the ANALOG 5.1CH OUT. For details of the playback, see the cover or instructions of the Super Audio CD.
Getting Started
To FRONT IN jacks (L/R)
To SURROUND or REAR IN jacks (L/R)
To SUB WOOFER |
| To CENTER IN |
| ||
| ||
IN jack |
| jack |
|
5GB