Clarion MAX675VDII owner manual Adjusting the General

Basic Operations

Warning display when CCD camera is installed

The following warning message is displayed during use of the CCD camera: “Make sure of safety around your vehicle”.

2-1. Touch the [ON] or [OFF] key of the CAMERA WARNING item to turn this function on or off (The factory default setting is “ON”).

Switching the VTR system between NTSC and PAL

Note:

•This setting is applied only to the VISUAL/VTR input mode.

2-1. Touch the [NTSC] or [PAL] key of the NTSC/PAL item to set the VTR system (The factory default setting is “NTSC”).

Changing the color of the background picture

2-1. Touch the []] key of the WALL COLOR item to display the WALL COLOR screen.

2-2. Touch the desired Color you wish to set (The factory default setting is “CYAN”).

Turning on/off the motion of the background picture

2-1. Touch the [ON] or [OFF] key of the MOTION item to set the function (The factory default setting is “ON”).

Front monitor lock

When an external device is connected to the Visual terminal, lock the front monitor to show the visual input source.

Note:

•This function is enabled only when the CONNECT item of the GENERAL menu is set to other than “NONE”.

1.Press the [MAP] button to set the monitor lock.

The front monitor screen is locked to show the visual input source.

2.To cancel the monitor lock, press the [MAP] button.

The screen returns to show the image of the selected mode.

Adjusting the GENERAL

1.Press the [ADJ] button, then touch the [GENERAL] key.

2.Touch the [C] key to display the next menu screen if desired.

3.Perform the adjustment for the desired item. See the following sections for detail.

4.Touch the [Back] key to return to the previous screen.

* In the following sections, only the details regarding adjustments are described, procedures to select items are skipped.

Setting the BEEP

The sound heard when you make operations is called “beep”. The unit can be set up so that it does not produce this beep sound.

• The factory default setting is “ON”.

3-1. Touch the [ON] or [OFF] key of the BEEP item to turn the function on or off.

Setting the Blink LED

When this function is set to “ON”, the Blink LED indicator will blink when the ACC power is turned off.

3-1. Touch the [ON] or [OFF] key of the BLINK LED item to turn the function on or off (The factory default setting is “OFF”).

•Setting the CATS function (see page 27) turns on the Blink LED function as well.

English Owner’s manual

MAX675VDII 25