Clarion MAX675VDII owner manual Controls/Commandes, Controles, Turning the power on

Page 4

Names of Buttons

Outline of Button and Touchkey Operation

English Français Español

English Owner’s manual

Note:

•Be sure to read this chapter while referring to the front diagrams for chapter “3. CONTROLS” on page 5 (unfold).

[&] (POWER) button

•Press this button to turn on the power. Keep pressing this button more than 1 second to turn off the power.

•Press this button to turn off the back light of the liquid crystal panel.

[7] (OPEN/CLOSE) button

•Use this button to open/close the operation panel.

•Keep pressing this button more than 2 seconds to adjust the angle of the operation panel. The angle of the operation panel is adjustable in the range of 0θ to 30θ.

Sensor

•Receiver for the remote control unit (operating range: 30θ in all directions).

[ISR] button

• Use this button to enter/exit the ISR (Instant

Station Recall) standby mode.

• Keep pressing this button more than 2 seconds

to store the current station into ISR memory in

the TUNER mode.

* The [ISR] button is disabled when the SUB

[BAND] button

•Press this button to switch the receiving bands for TUNER/Satellite Radio/TV modes. Keep pressing this button more than 1 second to switch the Seek/Manual tuning modes.

•Use this button to move to the first track in the CD, Video CD and iPod modes, or the first chapter in the DVD video mode.

•Use this button to move to the next folder in the MP3/WMA mode.

•Use this button to switch to the next disc in the changer modes.

•Keep pressing this button more than 1 second to play all tracks in the iPod mode.

[MENU] button

• Pressing this button in the Navigation mode

shows the Menu screen of the Navigation

system.

• When the menu screen of a DVD video/Video

CD is displayed, pressing this button displays

the Key Pad on the screen. When the other

screen than the menu screen is displayed,

keep pressing this button more than 1 second

to display the Key Pad.

• When displaying the GENERAL menu screen

in the ADJUST mode, keep pressing this

button more than 2 seconds to display a screen

for entering your personal code of the anti-theft

Turning the power on

 

English

 

 

 

Engine ON

Owner’s manual

 

 

 

position

 

 

∗1

 

 

&

 

 

(POWER)

 

3. CONTROLS/COMMANDES/

CONTROLES

● Operation panel / Panneau de commande / Panel de funcionamiento

[

] (POWER)

[

]

(OPEN/CLOSE)

Sensor

[ISR]

[ADJ]

Blink LED

[iPod]

 

[SRC]

[BAND]

[MAP][MENU]

●With the operation panel open / Avec le panneau de commande ouvert / Con el panel de funcionamiento abierto

[RESET]

Note

: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque

: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Nota

: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

zone is selected in the 2-ZONE mode.

[ADJ] button

•Press this button to enter/exit the ADJUST mode to change the settings.

•Keep pressing this button more than 1 second to enter/exit the Monitor Adjust mode.

Blink LED

•When the BLINK LED function is set to “ON” from the GENERAL menu in the ADJUST mode, blinks when the ACC power is turned off.

[p] button

•Press this button to enter the play pause mode in the DVD PLAYER/iPod/changer modes. Press the button again to resume playback.

•Keep pressing this button more than 1 second to mute the sound in the DVD PLAYER/iPod/ changer modes.

•Press this button to mute the sound in the TUNER/Satellite Radio/TV/VISUAL modes.

[R], [F] buttons

•Use these buttons to change to the previous/ next preset station in the TUNER/Satellite Radio/TV modes.

•Use these buttons to select a track in the CD, Video CD, MP3/WMA, iPod and CD changer modes.

•Use these buttons to select a chapter in the DVD video mode.

function.

[MAP] button

•Press this button to show the Map screen of the current location in the Navigation mode.

•Pressing this button in the audio/visual modes changes to the Navigation mode.

•Pressing this button switches the display to a Visual input screen to lock the monitor (To enable this function, go to the GENERAL menu (within the ADJUST menu), and touch the [CONNECT] key, and select the desired item other than “NONE”).

[SRC] button

•Press this button to display the Source menu screen to switch the mode.

[+], [–] buttons

•Use these buttons to increase/decrease the volume.

[iPod] button

• Press this button to switch to the iPod mode.

[o] (EJECT) button

• Use this button to eject the disc set in this unit.

System check

The CeNET format utilized on this unit is provided with a system check function. When the system check function is performed under the following conditions, the power is automatically turned off. Press the [&] (POWER) button again.

•When power is first turned on after initial installation.

•When an external device is connected or disconnected.

•When Reset button is pressed.

∗In addition to the above conditions, the system check function can be performed from the GENERAL menu in the ADJUST mode.

or

∗2

•You can change the media sources.

5

MAX675VDII

6

MAX675VDII

MAX675VDII

7

Page 3 Page 5
Image 4
Page 3 Page 5
Contents MAX675VDII Contents Features PrecautionsExpanding Systems Outline of Button and Touchkey OperationCONTROLS/COMMANDES Turning the power onControles Names of Buttons Outline of Button and Touchkey OperationDVD Player mode screen∗4 When automobile movingDVD Setup menu Source menuBAL/FAD BAL/FAD screenStatus Speaker SEL Status screen Speaker SEL menuMonitor ADJ Adjusting the other system settingsWall Color Remote control unit Remote ControlInserting the Batteries Functions of Remote Control Unit Buttons TUNER/TV/Satellite Radio modeDVD Player mode Shared modesIPod mode Functions of Remote Control Unit ButtonsCD changer mode When SUB zone is selected Controls sound volume for Main zone sourcePress to scroll the Disc/Track List screen Controls audio mute function for Main zone sourceCleaning Cleaning the cabinetCleaning the liquid crystal panel Operation panel/GeneralitiesHandling Discs DVD Video Features DVD Video SystemDiscs About the registered marks etcOperations Basic OperationsAdjusting the Audio Adjusting the angle of the operation panelAdjusting the balance/fader Basic Operations Opening/closing the operation panelBasic Operations Adjusting the Bass Adjusting the TrebleAdjusting the MID Adjusting the non fader output volumeAdjusting the brightness, color, hue and dimmer level Adjusting the MonitorBasic Operations Adjusting the General Setting the voice input line for the cellular phone Cellular phone interrupt settingSwitching Connect connect Basic Operations Performing the system checkAdjusting the Clock Setting the anti-theft function CatsSetting your Personal Code When the Enter Personal Code screen appearsZone Function Setting the 2-ZONE functionAbout the 2-ZONE function Basic Operations Monitor image and sound with 2-ZONE ON/OFF Seek tuning Manual tuningRadio Operations Listening to the radioRadio Operations Recalling a preset station Preset scanAuto store Manual memoryChanging DVD System Settings Setting up the screen sizeSelecting the DVD Setup menu Setting up the angle mark displaySetting up the audio language Setting up the subtitle languageSetting up the country code Setting up the parental levelBasic Operations DVD Video Operations Watching a DVD-VideoOperating the DVD menu Showing the DVD menuPausing playback DVD Video Player Operations Stopping playbackSkipping a chapter searching Slow playbackUsing the title menu Scan playbackRepeat playback TOP functionDVD Video Player Operations Switching among languages Switching subtitlesSwitching angles Displaying the playback statusSkipping a track searching Watching a video CDShowing the V-CD menu for Video CD discs with PBC Listening to a CD DVD Video Player Operations Searching with a track numberOn/Off of Playback Control Changing audio outputDVD Video Player Operations TOP function Selecting a track on the Track List screenOther various play functions Displaying CD titlesWhat is MP3/WMA? Precautions when creating an MP3 discListening to an MP3/WMA Displaying MP3/WMA TAG titlesPlayback by selecting a folder and track Direct select mode Selecting a folder/track on the List screenIllustration. However, on this unit, folders Touch the Back key to return to the Folder List screenDVD Video Player Operations Other various play functions Other Functions Entering titlesTitle list play TunerFactory default setting is F.WIDE Internal amplifier cancel functionOther Functions Changing over monitor display size IPod Operations AccessoriesControlling the iPod IPod Operations TOP function Fast forward and fast backwardSelecting a list item from a list screen Visual Operations CD Changer OperationsSearching with a track number TV Operations TV functionsWatching TV Watching a videoTV Operations Recalling a preset station Setting the TV diverUsing the Preset List screen Touch the List key again to return to the previous screenSatellite Radio Operations Tuning mode T-MODE Receiving stations selected by categorySatellite Radio Operations Presetting a category Preset scanScan function Category scanningSetting Navi as external input equipment Navi OperationsNavi functions Navi operationNavi Operations Connecting Other Company’s Image Equipment Changing displayDimension Ch Surround Decoder OperationsCh Surround Decoder control function PanoramaCh Surround Decoder Operations DSF mode EQ modeSubwoofer volume adjustment Balance/Fader adjustmentCenter volume adjustment Troubleshooting Problem Cause MeasureSee the subsection Setting up the parental DVD PlayerTV/VTR When connecting an optional TV tuner, etc Error Displays CD ChangerSpecifications Installation and Wire Connection Manual English Installation Manual Installing the Main Unit in a Nissan Vehicle For Nissan vehicleVehicles other than Nissan and Toyota Installing the Main Unit in a Toyota VehicleRemoving the Main Unit Fuse 15A Fuse Fuse holder CCA-670 Wireless HeadphoneCCA-673 +12V main power Rear right +12V accessory Front right + Front left +Ground Rear right +Connecting the Accessories Connecting the parking brake cordSet the SLAVE/STAND Alone switch to the Slave position FrontHDD Navigation Channel Amplifier2007/3 Y-YI QZ-6070B
Top Page Image Contents