Clarion MAX675VDII owner manual Adjusting the Clock, Setting the anti-theft function Cats

Page 23

Basic Operations

Adjusting the CLOCK

Note:

•This setting is disabled when the Navigation system is connected. The clock is automatically adjusted using the CT (clock time) data in the GPS data.

1.Press the [ADJ] button, then touch the [CLOCK] key.

2.Touch the [{] and [}] keys under the Hour, Minute and a.m./p.m. box to adjust the time, then touch the [SET] key (The factory default setting is “1:00 a.m.”).

* The time is displayed in 12-hour format.

Setting the anti-theft function (CATS)

“CATS” is the acronym of “Clarion Anti-Theft System”.

When you set a PIN code (called as “Personal Code”), a theft is prevented by disabling the operation of the unit at the theft.

In addition, set the BLINK LED function in the GENERAL menu to [ON] to improve the effect of the CATS function (see page 25).

Setting your Personal Code

1.Press the [ADJ] button, then touch the [GENERAL] key.

2.Keep pressing the [MENU] button more than 2 seconds.

The SET PERSONAL CODE screen appears.

* When a Personal Code is already set, the ERASE PERSONAL CODE screen will appear. Retry this operation after erasing the old Personal Code.

3.Enter your desired 4-digit Personal Code by touching the [0] to [9] keys, then touch the [ENT] key.

* Touch the [CLR] key when you make a mistake in entering.

Note:

•Write down your Personal Code in case you forget it.

4.Enter the same Personal Code again for confirmation, then touch and hold the [ENT] key for more than 2 seconds.

The entered Personal Code will be set, and it will return to the previous screen.

Erasing the Personal Code

1.Press the [ADJ] button, then touch the [GENERAL] key.

2.Keep pressing the [MENU] button more than 2 seconds.

The ERASE PERSONAL CODE screen appears.

3.Enter the Personal Code currently set by touching the [0] to [9] keys, then touch and hold the [ENT] key for more than 2 seconds. The message “CODE ERASED” appears, and it will return to the previous screen.

When the ENTER PERSONAL CODE screen appears

The ENTER PERSONAL CODE screen will be displayed when turning the ACC power on after performing the following operations:

•The car battery was replaced.

•The backup power was cut off.

•The Reset button was pressed.

Note:

•If you have lost your Personal Code, please contact Clarion customer service at 800-347-8667.

1.Enter your Personal Code currently set.

2.When the correct Personal Code is entered, the unit will restart from the initial startup screen.

Note:

•When you enter a wrong Personal Code, the message “CODE INCORRECT” is displayed and the Personal Code entry is prohibited for a while. This prohibited time is changed according to the number of times of wrong code entry as follows:

•1 to 6 times: 15 seconds

•7 times or more: 15 minutes

English Owner’s manual

MAX675VDII 27

Page 22 Page 24
Image 23
Page 22 Page 24
Contents MAX675VDII Contents Outline of Button and Touchkey Operation FeaturesPrecautions Expanding SystemsNames of Buttons Outline of Button and Touchkey Operation CONTROLS/COMMANDESTurning the power on ControlesSource menu DVD Player mode screen∗4When automobile moving DVD Setup menuBAL/FAD screen BAL/FADStatus screen Speaker SEL menu Status Speaker SELWall Color Adjusting the other system settingsMonitor ADJ Inserting the Batteries Remote ControlRemote control unit Shared modes Functions of Remote Control Unit ButtonsTUNER/TV/Satellite Radio mode DVD Player modeCD changer mode Functions of Remote Control Unit ButtonsIPod mode Controls audio mute function for Main zone source When SUB zone is selectedControls sound volume for Main zone source Press to scroll the Disc/Track List screenOperation panel/Generalities CleaningCleaning the cabinet Cleaning the liquid crystal panelHandling Discs DVD Video System DVD Video FeaturesAbout the registered marks etc DiscsBasic Operations OperationsBasic Operations Opening/closing the operation panel Adjusting the AudioAdjusting the angle of the operation panel Adjusting the balance/faderAdjusting the non fader output volume Basic Operations Adjusting the BassAdjusting the Treble Adjusting the MIDBasic Operations Adjusting the MonitorAdjusting the brightness, color, hue and dimmer level Adjusting the General Basic Operations Performing the system check Setting the voice input line for the cellular phoneCellular phone interrupt setting Switching Connect connectWhen the Enter Personal Code screen appears Adjusting the ClockSetting the anti-theft function Cats Setting your Personal CodeAbout the 2-ZONE function Setting the 2-ZONE functionZone Function Basic Operations Monitor image and sound with 2-ZONE ON/OFF Listening to the radio Seek tuningManual tuning Radio OperationsManual memory Radio Operations Recalling a preset stationPreset scan Auto storeSetting up the angle mark display Changing DVD System SettingsSetting up the screen size Selecting the DVD Setup menuSetting up the parental level Setting up the audio languageSetting up the subtitle language Setting up the country codeBasic Operations Showing the DVD menu DVD Video OperationsWatching a DVD-Video Operating the DVD menuSlow playback Pausing playbackDVD Video Player Operations Stopping playback Skipping a chapter searchingTOP function Using the title menuScan playback Repeat playbackDisplaying the playback status DVD Video Player Operations Switching among languagesSwitching subtitles Switching anglesShowing the V-CD menu for Video CD discs with PBC Watching a video CDSkipping a track searching Changing audio output Listening to a CDDVD Video Player Operations Searching with a track number On/Off of Playback ControlDisplaying CD titles DVD Video Player Operations TOP functionSelecting a track on the Track List screen Other various play functionsDisplaying MP3/WMA TAG titles What is MP3/WMA?Precautions when creating an MP3 disc Listening to an MP3/WMATouch the Back key to return to the Folder List screen Playback by selecting a folder and track Direct select modeSelecting a folder/track on the List screen Illustration. However, on this unit, foldersDVD Video Player Operations Other various play functions Tuner Other FunctionsEntering titles Title list playOther Functions Changing over monitor display size Internal amplifier cancel functionFactory default setting is F.WIDE Controlling the iPod AccessoriesIPod Operations IPod Operations Selecting a list item from a list screen Fast forward and fast backwardTOP function CD Changer Operations Visual OperationsSearching with a track number Watching a video TV OperationsTV functions Watching TVTouch the List key again to return to the previous screen TV Operations Recalling a preset stationSetting the TV diver Using the Preset List screenSatellite Radio Operations Receiving stations selected by category Tuning mode T-MODECategory scanning Satellite Radio Operations Presetting a categoryPreset scan Scan functionNavi operation Setting Navi as external input equipmentNavi Operations Navi functionsChanging display Navi Operations Connecting Other Company’s Image EquipmentPanorama DimensionCh Surround Decoder Operations Ch Surround Decoder control functionCh Surround Decoder Operations EQ mode DSF modeCenter volume adjustment Balance/Fader adjustmentSubwoofer volume adjustment DVD Player TroubleshootingProblem Cause Measure See the subsection Setting up the parentalTV/VTR When connecting an optional TV tuner, etc CD Changer Error DisplaysSpecifications Installation and Wire Connection Manual English Installation Manual For Nissan vehicle Installing the Main Unit in a Nissan VehicleRemoving the Main Unit Installing the Main Unit in a Toyota VehicleVehicles other than Nissan and Toyota Fuse 15A Fuse Fuse holder CCA-673 Wireless HeadphoneCCA-670 Rear right + +12V main powerRear right +12V accessory Front right + Front left + GroundConnecting the parking brake cord Connecting the AccessoriesChannel Amplifier Set the SLAVE/STAND Alone switch to the Slave positionFront HDD NavigationQZ-6070B 2007/3 Y-YI
Top Page Image Contents