Clarion MAX675VDII Zone Function, Setting the 2-ZONE function, About the 2-ZONE function

English

Basic Operations

2-ZONE Function	Setting the 2-ZONE function
	• The factory default setting is “OFF”.

Owner’s manual

About the 2-ZONE function

The 2-ZONE function is a function that outputs separate sounds/images from the MAIN zone and SUB zone (such as the optional rear monitor) by simultaneously operating two sources in the one center unit. Thereby, plural listeners are allowed to enjoy separate audio/visual sources. The 2-ZONE function allows internal sources (TUNER, DVD, VISUAL, iPod) and external sources via CeNET connection (CD changer, TV, Satellite Radio, etc.) to be played on MAIN zone and SUB zone.

Controlling sources of MAIN zone and SUB zone can be made from the main unit and from the remote control unit.

The source sounds of the MAIN zone are played back from the speakers of the vehicle side, and those of the SUB zone are from the headphone systems (WH104).

Sound volume control on the SUB zone is performed by the headphone system (WH104).

Note:

•The TUNER mode cannot be specified for the SUB zone.

•The 2-ZONE function is disabled when the 5.1 channel surround decoder (DVH940N) is connected.

•The steering wheel remote control operations work upon the MAIN zone even when the SUB zone is selected.

•When a voice interrupt of the navigation system arises during 2-ZONE ON, the sound of the MAIN zone is muted, and the sound of the SUB zone is output normally.

When it arises during 2-ZONE OFF, the audio signals to the 4ch speakers are attenuated, and the voice from the navigation system is output from the front two speakers.

•You cannot operate the 2-ZONE function during the voice interrupt of the navigation system.

•If a cellular phone interrupt arises when an external equipment is specified for the SUB zone, the 2- ZONE function is automatically turned off, and it does not resume to the 2-ZONE ON status even when the interruption is finished.

•You cannot switch the MAIN and SUB zone when the following screen is displayed:

•Navigation mode screen

•Front monitor locked screen

•CCD camera screen

*The function can also be switched by using the remote control unit. See the chapter “Remote Control” (page 13) for details.

1.Press the [SRC] button to display the Source menu.

2.Touch and hold the [2 ZONE] key more than 1 second to turn the 2-ZONE function on. The 2-ZONE indication is displayed at the top left of the screen.

2-ZONE indication

Displayed when 2-ZONE function is turned on.

•[MAIN]:MAIN zone is selected.

•[SUB]:SUB zone is selected.

3.Touch the [SUB] key on the Source menu to switch to the SUB zone.

You can control the operation modes for the SUB zone.

4.Press the [SRC] button, and touch the [MAIN] key to return to the MAIN zone.

5.To turn the 2-ZONE function off, touch the [2 ZONE] key on the Source menu.

28 MAX675VDII