Clarion MAX675VDII Basic Operations Performing the system check, Cellular phone interrupt setting

Page 22

Basic Operations

English Owner’s manual

Performing the system check

3-1. Touch the []] key of the SYSTEM CHECK item.

3-2. Touch [Check] key at the top right of the

screen to perform the system check manually.

The system will be restarted after performing the system check.

Changing the output speaker for the cellular phone

When you connect your cellular phone to this unit using a separately sold adaptor, you can listen to your telephone calls on your car speakers.

The factory default setting is “RIGHT”.

To output the telephone calls, set the following TEL SWITCH item to “ON”.

3-1. Touch the [LEFT] or [RIGHT] key of the TEL SP item to set to “LEFT” or “RIGHT”.

LEFT:

Telephone calls are heard from the front left speaker connected to this unit.

RIGHT:

Telephone calls are heard from the front right speaker connected to this unit.

Note:

During cellular phone interrupts, setting this function is disabled.

Note:

This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.

When you set this function to “OFF”, disconnect the cellular phone from the cable or turn off the power of the cellular phone.

Setting the voice input line for the cellular phone

When you connect your cellular phone to this unit, select the connection method of the adaptor box.

• The factory default setting is “CeNET”.

3-1. Touch the [C] key to display the next menu screen.

3-2. Touch the [CeNET] or [AUX] key of the TEL SELECT item to set to “CeNET” or “AUX”.

CeNET:

Selects when the adaptor box is connected via the CeNET.

AUX:

Selects when the adaptor box is connected to Audio (left/right) of the Visual input terminal.

Note:

When setting to “AUX”, the VISUAL mode is altered to the ACCESSORY mode.

Cellular phone interrupt setting

• The factory default setting is “OFF”.

3-1. Touch the [ON], [OFF] or [MUTE] key of the TEL SWITCH item to set to “ON”, “OFF” or “MUTE”.

ON:

You can listen to your telephone calls from the speakers connected to this unit.

*When listening to your calls on your car speakers, you can adjust the volume using the [+]/[] buttons.

OFF:

This unit continues normal operation even when you use the cellular phone.

MUTE:

The sound from this unit is muted during telephone calls.

Switching CONNECT (connect)

Make the following settings when an external device is connected to the Visual terminal.

NAVI:

When a navigation system is connected.

*When the navigation system is connected, use the monitor lock function. Locking the monitor locks the screen size in F.WIDE mode (full wide) and the VTR system to NTSC.

OTHER:

For external devices other than a navigation system.

NONE:

When no external device is connected.

• The factory default setting is “NONE”.

3-1. Touch the [C] key to display the next menu screen.

3-2. Touch the [NAVI], [OTHER] or [NONE] key of the CONNECT item to set the function to “NAVI”, “OTHER” or “NONE”.

26 MAX675VDII

Image 22
Contents MAX675VDII Contents Expanding Systems FeaturesPrecautions Outline of Button and Touchkey OperationControles CONTROLS/COMMANDESTurning the power on Names of Buttons Outline of Button and Touchkey OperationDVD Setup menu DVD Player mode screen∗4When automobile moving Source menuBAL/FAD BAL/FAD screenStatus Speaker SEL Status screen Speaker SEL menuMonitor ADJ Adjusting the other system settingsWall Color Remote control unit Remote ControlInserting the Batteries DVD Player mode Functions of Remote Control Unit ButtonsTUNER/TV/Satellite Radio mode Shared modesIPod mode Functions of Remote Control Unit ButtonsCD changer mode Press to scroll the Disc/Track List screen When SUB zone is selectedControls sound volume for Main zone source Controls audio mute function for Main zone sourceCleaning the liquid crystal panel CleaningCleaning the cabinet Operation panel/GeneralitiesHandling Discs DVD Video Features DVD Video SystemDiscs About the registered marks etcOperations Basic OperationsAdjusting the balance/fader Adjusting the AudioAdjusting the angle of the operation panel Basic Operations Opening/closing the operation panelAdjusting the MID Basic Operations Adjusting the BassAdjusting the Treble Adjusting the non fader output volumeAdjusting the brightness, color, hue and dimmer level Adjusting the MonitorBasic Operations Adjusting the General Switching Connect connect Setting the voice input line for the cellular phoneCellular phone interrupt setting Basic Operations Performing the system checkSetting your Personal Code Adjusting the ClockSetting the anti-theft function Cats When the Enter Personal Code screen appearsZone Function Setting the 2-ZONE functionAbout the 2-ZONE function Basic Operations Monitor image and sound with 2-ZONE ON/OFF Radio Operations Seek tuningManual tuning Listening to the radioAuto store Radio Operations Recalling a preset stationPreset scan Manual memorySelecting the DVD Setup menu Changing DVD System SettingsSetting up the screen size Setting up the angle mark displaySetting up the country code Setting up the audio languageSetting up the subtitle language Setting up the parental levelBasic Operations Operating the DVD menu DVD Video OperationsWatching a DVD-Video Showing the DVD menuSkipping a chapter searching Pausing playbackDVD Video Player Operations Stopping playback Slow playbackRepeat playback Using the title menuScan playback TOP functionSwitching angles DVD Video Player Operations Switching among languagesSwitching subtitles Displaying the playback statusSkipping a track searching Watching a video CDShowing the V-CD menu for Video CD discs with PBC On/Off of Playback Control Listening to a CDDVD Video Player Operations Searching with a track number Changing audio outputOther various play functions DVD Video Player Operations TOP functionSelecting a track on the Track List screen Displaying CD titlesListening to an MP3/WMA What is MP3/WMA?Precautions when creating an MP3 disc Displaying MP3/WMA TAG titlesIllustration. However, on this unit, folders Playback by selecting a folder and track Direct select modeSelecting a folder/track on the List screen Touch the Back key to return to the Folder List screenDVD Video Player Operations Other various play functions Title list play Other FunctionsEntering titles TunerFactory default setting is F.WIDE Internal amplifier cancel functionOther Functions Changing over monitor display size IPod Operations AccessoriesControlling the iPod IPod Operations TOP function Fast forward and fast backwardSelecting a list item from a list screen Visual Operations CD Changer OperationsSearching with a track number Watching TV TV OperationsTV functions Watching a videoUsing the Preset List screen TV Operations Recalling a preset stationSetting the TV diver Touch the List key again to return to the previous screenSatellite Radio Operations Tuning mode T-MODE Receiving stations selected by categoryScan function Satellite Radio Operations Presetting a categoryPreset scan Category scanningNavi functions Setting Navi as external input equipmentNavi Operations Navi operationNavi Operations Connecting Other Company’s Image Equipment Changing displayCh Surround Decoder control function DimensionCh Surround Decoder Operations PanoramaCh Surround Decoder Operations DSF mode EQ modeSubwoofer volume adjustment Balance/Fader adjustmentCenter volume adjustment See the subsection Setting up the parental TroubleshootingProblem Cause Measure DVD PlayerTV/VTR When connecting an optional TV tuner, etc Error Displays CD ChangerSpecifications Installation and Wire Connection Manual English Installation Manual Installing the Main Unit in a Nissan Vehicle For Nissan vehicleVehicles other than Nissan and Toyota Installing the Main Unit in a Toyota VehicleRemoving the Main Unit Fuse 15A Fuse Fuse holder CCA-670 Wireless HeadphoneCCA-673 Ground +12V main powerRear right +12V accessory Front right + Front left + Rear right +Connecting the Accessories Connecting the parking brake cordHDD Navigation Set the SLAVE/STAND Alone switch to the Slave positionFront Channel Amplifier2007/3 Y-YI QZ-6070B