5.1 ch Surround Decoder Operations
DSF mode
DSF effect ON/OFF
• The factory default setting is “OFF”.
1.Press the [ADJ] button, and touch the [AUDIO] key.
2.Touch the []] key of the STATUS item.
3.Touch the [ON] or [OFF] key of the DSF item to turn the function ON or OFF.
4.Touch the [Back] key to return to the previous screen.
Note:
•If the DSF effect is set to OFF, the adjustment made in “DSF” is not reflected in the music source.
Selecting the DSF type
1.Press the [ADJ] button, and touch the [AUDIO] key.
2.Touch the []] key of the DSF item.
3.Touch the key for the desirable type to select.
4.Touch the [Back] key to return to the previous screen.
P.EQ mode
P.EQ effect ON/OFF
• The factory default setting is “OFF”.
1.Press the [ADJ] button, and touch the [AUDIO] key.
2.Touch the []] key of the STATUS item.
3.Touch the [ON] or [OFF] key of the P.EQ item to turn the function ON or OFF.
4.Touch the [Back] key to return to the previous screen.
Note:
•If the P.EQ effect is set to OFF, the adjustment made in “P.EQ” is not reflected in the music source.
Setting and storing P.EQ Properties
1.Press the [ADJ] button, and touch the [AUDIO] key.
2.Touch the []] key of the P.EQ item to display the submenu.
3.Touch the key for the desirable type to select. The P.EQ adjustment contents are as follows: [SIGNAL]:
This function selects “MUSIC” or “P.NOISE”.
• The factory default setting is “P.NOISE”.
[SPEAKER SELECT]:
This function selects “FRONT”, “CENTER” or “SURROUND”.
• The factory default setting is “FRONT”.
*This setting is disabled when both the CENTER SP and SURROUND SP items of the SPEAKER SEL setting are set to “OFF”.
*This function is not available for speakers whose SPEAKER SEL setting is set to “OFF”.
[BAND]:
Select the channel to be compensated (“BAND1”, “BAND2”, “BAND3”).
•The factory default setting is “BAND1”. [FREQUENCY]:
Select the center frequency that you want to compensate from the range of 18 Hz to
20 kHz. (1/3 octave step, 31 points)
•The factory default setting is “1 kHz”.
[Q]:
Set the sharpness of the
•The factory default setting is “1”. [GAIN]:
Adjust the gain (output level) in the range of
•The factory default setting is “0”.
4.Touch the [Back] key to return to the previous screen.
English Owner’s manual
MAX675VDII 61