Toshiba D-VR3SU owner manual Playing a Disc, Playback, Discs that cannot be played

Discs that cannot be played

Playing a Disc

•DVD-Video with a region number other than “1” or “ALL” •3.9 GB DVD-R Disc for Authoring.

•DVD-RAM not recorded following the Video Recording Standard

•Unfinalized DVD-R recorded on other equipment.
•PAL discs
•DVD-ROM/DVD+RW/PD/MV-Disc/DiVX Video Disc, etc	ON / STANDBY	TV ON / STANDBTY
•Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I

	This DVD Recorder-VCR can only operate with
Note	discs that are compatible with DVD-RAM Standard
	Version 2.0.
	Playback and/or recording may not work for some			TV MUTE
		100 +		AUDIO
	types of discs, or when specific operations, such as		SELECT
		DVD		INPUT SEL.
	angle change and aspect ratio adjustment, are being		VCR	TV
			VOL	CH / TRK
	performed. Information about the discs is written in	OPEN/CLOSE		F / ADV / SKIP
	detail on the box. Please refer to this if necessary	VCR Plus+		MARKER
	Do not allow the disc to become dirty or scratched,
	Finger prints, dirt, dust, scratches or deposits of cig-
	arette smoke on the recording surface may make it
	impossible to use the disc for recording.
	To protect a DVD-RAM disc from damage, use a car-
	tridge.

1	Press the OPEN/CLOSE button.		Do not move your DVD Recorder-VCR while play-
			ing, as this may cause damage to the disc.
		CAUTION
			Make sure to press the OPEN/CLOSE button to
2			open or close the disc tray.
	Place a disc gently into the tray with the disc’s label		Do not push the disc tray while it is being opened
	facing up.		or closed, as this may cause a product malfunction.
			Do not place foreign materials on or in the disc
			tray.
	Press OPEN/CLOSE button to close the disc tray.		Some functions may perform differently or be dis-
			abled depending on the disc type. If this occurs,
3 • Your DVD Recorder-VCR closes the disc tray and
			refer to the instructions written on the disc case.
	plays the disc automatically.		Be especially careful that children's fingers are not
	• When a recordable media (DVD-RAM, DVD-RW,
			caught between the disc tray and the tray chassis
	DVD-R, etc.) is used, Auto Playback cannot be
	activated without pressing the Play button. When		when it closes.
	pressing the Power button while a disc is in the		After turning power on, it will take a few

tray, the unit will be activated. Press PLAY to start	seconds until the DVD operates.
playback.

•If you insert MP3 Disc, your DVD Recorder-VCR will display the file list on the screen and start.

•When a JPEG disc is inserted, folders and a file list are displayed in the Album format.

4 Press the STOP button to stop playback.

Playback

DVD-RAM/R/RW discs may not be able to play on
some DVD players, depending on the player, disc	RETURN			CLEAR
and the condition of the recording.	DISPLAY	TV / VCR	SUBTITLE	REC SPEED
Discs with PAL programs recorded on them	REC	DVD	VCR	REC PAUSE
cannot be recorded using this product.	PIP	COPY		TIME SLIP

Note

When you stop disc play, the recorder remembers

where you stopped, so when you press PLAY but-

ton again, it will pick up where you left off. (unless

the disc is removed or the recorder is unplugged,

or if you press the STOP button twice.) This func-

tion is only applicable to DVD-VIDEO, DVD-RAM,

DVD-RW, DVD-R or audio CDs (CD-DA).

Playback

40 - English English - 41