10. OSD menu settings
All of the DVD player's settings can be made with the remote control via the so called "On Screen Display" menu ("OSD menu" for short). The OSD Menu will be superimposed on the television screen.
Note:
In these instructions the English OSD menu is described. At any time you can set the menu to your country's language as described in "GENERAL > OSD LANGUAGE".
| GENERAL | AUDIO | DOLBY | VIDEO | PREFERENCE |
|
|
|
|
|
|
| TV DISPLAY | PS |
|
| |
| ANGLE MARK | ON |
|
| |
| OSD LANGUAGE | ENG |
|
| |
| CLOSED CAPTIONS | OFF |
|
| |
| SCREEN SAVER | ON |
|
| |
| LAST MEMORY | OFF |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
Before you use the DVD player for the first time for playback of DVDs,
•the language, in which you want the OSD menu to be displayed
•which TV standard corresponds to the television, to which you want to connect the DVD player
•Which image format your television can display
Administering settings via the OSD menu
•First insert the connector plug of the DVD player's power cord into a power socket.
•To switch the DVD player on activate the POWER switch on the rear panel of the DVD player. If the DVD player is already switched on but is in standby mode, press the button 
STANDBY on the remote control to
switch the DVD player on. The standby mode is identified by the LED in the display on the front panel of the device.
The device will check to see if a disc is inserted. The SilverCrest logo appears on the television screen:
If no disc is inserted the notification NO DISC appears on the television screen and in the display.
•Firstly please familiarize yourself with the OSD Menu's operation by means of the following brief introduction.
10.1 Using the OSD Menu
•To access the DVD players OSD menu press the SETUP button on the remote control. The OSD Menu with its menu options will appear on the television screen:
| GENERAL | AUDIO | DOLBY | VIDEO | PREFERENCE |
|
|
|
|
|
|
| TV DISPLAY | PS |
|
| |
| ANGLE MARK | ON |
|
| |
| OSD LANGUAGE | ENG |
|
| |
| CLOSED CAPTIONS | OFF |
|
| |
| SCREEN SAVER | ON |
|
| |
| LAST MEMORY | OFF |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
The following menu options can be selected:
GENERAL, AUDIO, DOLBY, VIDEO and PREFERENCE.
• | With the control buttons | and the ENTER button you can carry |
| out all the settings in the menu. | |
• | With the control buttons | you can select a menu by moving the yellow |
| marking onto the corresponding menu symbol. | |
• | With the control buttons | you select an input in a menu by moving |
| the green bar over an input. | |
• | With the control button | you change an input in the sub menu and with |
| the control button you move back to the previous menu level. | |
•To confirm a selection press the ENTER button.
All navigation possibilities in a current menu are displayed at the lower edge of the menu.
•To exit the OSD menu press the SETUP button again.
10.2 Setup menu GENERAL
In this menu you can, for example, set the image presentation or the language of the OSD menu.
| GENERAL | AUDIO | DOLBY | VIDEO | PREFERENCE |
|
|
|
|
|
|
| TV DISPLAY | PS |
|
| |
| ANGLE MARK | ON |
|
| |
| OSD LANGUAGE | ENG |
|
| |
| CLOSED CAPTIONS | OFF |
|
| |
| SCREEN SAVER | ON |
|
| |
| LAST MEMORY | OFF |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
TV DISPLAY
Note:
The menu option TV DISPLAY is only selectable when the HDMI output is deactivated.
- 8 -