Silvercrest KH 6525, KH 6524 operating instructions Setup menu Audio

Select this setting if the diameter of the speaker membrane is greater than 12 cm.

Select this setting for smaller speakers.

Deactivate sound output for these types of speakers

ANGLE MARK

-ON	If scenes are recorded on a DVD in different perspectives
	this will automatically be signified by a camera symbol
	displayed on the television screen. Press the ANGLE button
	on the remote control to display the various perspectives.
-OFF	Deactivate function. No symbol appears on the television
	screen.

OSD LANGUAGE

Here you set the language, in which the OSD Menu will be shown on the display.

-3D SURROUND Select this setting to produce a virtual surround effect from

	a stereo or multi channel sound.
-5.1 CH	Select this setting to activate the analogue 5.1 outputs.

FRONT SPEAKER, CENTER SPEAKER, REAR SPEAKER and SUBWOOFER In these menu inputs you can activate/deactivate the individual speaker types and set the size.

-Large

-Small -OFF

CLOSED CAPTIONS		Note:
-ON	Select this setting if by every playback of a DVD the subtitle	The menu input FRONT SPEAKER can not be deactivated since the sound
	(if present) is to be automatically displayed on the television	output for the front speakers always remains switched on.
	screen.
-OFF	Select this setting to manually activate the subtitle.	DIALOG	In this menu input you can set the dialogue volume (0-20).
	The subtitles can also be set, during playback, with the
	SUBTITLE button.	D.R.C. (Dynamic Range Control)
		This function sets the level of the dynamic range for motion picture soundtracks
SCREEN SAVER		which are optimised for Dolby Digital. The function is particularly useful when
-ON	Screen saver activated. The screen saver will now switch	listening to surround sound with a low volume level.
	on when the playback is stopped and no activity takes	-ON	Function activated
	place for several minutes.	-OFF	Function deactivated.
-OFF	Deactivate function.	-AUTO	Function (if available) is automatically activated

LAST MEMORY

-ON	Select this setting to playback a disc from the previously
	halted position after removal and re-insertion.
-OFF	Deactivate function. The disc playback starts back at the
	begining after removing and then reinserting.

Note:

If the DVD player is turned off with the POWER switch the saved position will not be preserved.

10.3 Setup menu AUDIO

In this OSD menu you can, for example, carry out settings for the analogue as well as the digital audio outputs.

GENERAL AUDIO DOLBY VIDEO PREFERENCE

ANALOG AUDIO

DIGITAL AUDIO

CHANNEL DELAY

EQUALIZER

3D PROCESSING

ANALOG AUDIO

DOWNMIX

If you use the analogue 5.1 output in this menu you can carry out the appropriate settings.

-LT/RT	Only the left and right channels at the sockets FL and FR
	will put out signals.
-STEREO	A stereo sound will be put out. Select this setting if you are
	not using the analogue 5.1 outputs. The menu options
	CENTER SPEAKER and REAR SPEAKER are then not requi-
	red and therefore inactive.

DIGITAL AUDIO

DIGITAL OUTPUT

In this menu input you can set the SPDIF output signal.

-SPDIF / OFF	No digital audio signal is being put out at the sockets
	COAXIAL or OPTICAL.
-SPDIF / RAW	The crude data of the Dolby Digital sound is put out.
-SPDIF /PCM	Select the setting PCM (Pulse Code Modulation) when there
	is a connection to a digital amplifier/receiver. Your DVD
	player transmits, through the PCM signal, the same audio
	formats that are rendered on the disc. In addition an audio
	signal will be put out via the sockets FL and FR.
LPCM OUTPUT	Select this input to set the sampling frequency for the
	processing of the crude data.
-48K:	Default setting.
-96K:	Only for DVDs with the corresponding sampling frequency.

Note:

The LPCM OUTPUT function is only available if you have set the SPDIF audio output signal to PCM.

CHANNEL DELAY

Select this menu input to set the channel delay of the individual speakers. With optimal settings the sound reaches your ears simultaneously from all directions.

With the control button	go to the graphics field beside the input.
With the control buttons	or	select the speaker.
With the control buttons		you increase/decrease the value in increments

of 10 cm. The maximum setable deviation for the CENTER speaker is 170 cm. The maximum setable deviation for the SUBWOOFER and the rear speakers is 510 cm.

Confirm your entry by pressing the ENTER button.

Note:

The channel delay is determined by the front speakers therefore these are not selectable.

- 9 -