Configuring the DV-SP506—Continued
SCART Output Setting (European model only)
With this setting you can select the video format to be used for the SCART AV CONNECTOR: RGB,
Composite (default): Composite video offers stan- dard quality.
RGB: This format offers the best picture quality.
Notes:
•If you select a format that is not supported by your TV, the setup menu may disappear from the screen. If this happens, switch off your equipment, connect the
•When RGB is selected, nothing is output by the com- ponent video output.
Audio Menu
Depending on the HDMI Audio Out setting (see below), Audio menu settings may be fixed at a particular value, available for changing, or unavailable, as shown in the following table.
|
| HDMI Audio Out setting |
| |||
Setting |
|
|
|
|
|
|
Auto |
| 6ch | 6ch | 2ch | Off | |
|
| DSD | PCM | PCM | ||
|
|
|
| |||
|
|
|
|
|
|
|
Digital Audio Out | *1 |
| *1 | *1 | PCM | ✓ |
|
|
|
|
|
|
|
Linear PCM Out | *1 |
| *1 | *1 | On | ✓ |
|
|
|
|
|
|
|
Subwoofer | On |
| On | On | ✓ | ✓ |
|
|
|
|
|
|
|
Front Speaker | Large |
| Large | Large | ✓ | ✓*2 |
Center Speaker | Large |
| Large | Large | ✓ | ✓*3 |
Surround Speaker | Large |
| Large | Large | ✓ | ✓*3 |
Center Delay | Off |
| Off | Off | ✓ | ✓ |
|
|
|
|
|
|
|
Surr. Delay | Off |
| Off | Off | ✓ | ✓ |
|
|
|
|
|
|
|
Test Tone | Off |
| Off | Off | ✓ | ✓ |
|
|
|
|
|
|
|
Dynamic Range | Off |
| Off | Off | ✓*4 | ✓*4 |
Control |
| |||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Dolby Pro Logic | Off |
| Off | Off | ✓ | ✓ |
|
|
|
|
|
|
|
SACD Audio | *1 |
| DSD | PCM | PCM | ✓ |
Setup |
| |||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Downmix Setting | ✗ |
| ✗ | ✗ | ✓ | ✓ |
|
|
|
|
|
|
|
✓: Available ✗: Unavailable
*1: Set automatically depending on the connected HDMI com- ponent.
*2: When the Subwoofer setting is set to Off, this setting is fixed at Large.
*3: If the Front Speaker, Surround Speaker, or Center Speaker setting is set to Small, this setting can only be set to Small or Off.
*4: When the
HDMI Audio Out
With this setting you can specify how the HDMI OUT outputs audio.
Auto (default): Audio is output at optimum quality.
6ch DSD: SACD audio is output in DSD (Direct Stream Digital) format. If the HDMI input on your AV receiver or TV does not support DSD, there will be no sound. This option is also suitable for SACD playback via the multichannel analog audio output.
6ch PCM: SACD audio is converted to
2ch PCM: Multichannel audio is converted to 2- channel PCM. Select this option to output the sound through your TV’s speakers without using an AV receiver. Dolby Digital and DTS will be converted to PCM.
Off: Audio is not output by the HDMI OUT. Audio is output by the OPTICAL and COAXIAL digital out- puts. Select this option if you’re using the analog or digital audio outputs to output audio instead of the
HDMI OUT.
Note:
•While an SACD or
Digital Audio Out
With this setting you can configure the type of audio sig- nals output from the digital audio outputs. If your TV or AV receiver does not support Dolby Digital or DTS, select the PCM option.
All (default): Dolby Digital and DTS signals are out- put as they are.
PCM: Dolby Digital and DTS signals are converted to Linear PCM. If your TV or AV receiver does not support Dolby Digital or DTS, select the PCM option.
Off: No digital signals are output by the digital out- puts.
Note:
• MPEG is output as PCM regardless of this setting.
51