
Configuring the DV-SP506—Continued
Change the Security Code
To change the Security Code, confirm your existing code then enter a new one.
1 | Select “Operation Setting” menu | |
| ||
| in the setup. | |
|
| |
2 | Use the Up/Down [ ]/[ ] buttons | |
| ||
Remote | to select “Security Code,” and | |
then press the [ENTER] button. | ||
controller | ||
| The security code input screen appears. |
3 | Enter the existing security code | |
| ||
Remote | using the remote controller’s | |
number buttons, and then press | ||
controller | ||
| the [ENTER] button. | |
| The default security code is “8888.” | |
| Even if a new security code has been | |
| entered, the code “8888” can still be | |
| used. | |
| Once the security code has been | |
| entered, the new security code input | |
| screen appears. |
4 | Enter the new security code | |
| ||
Remote | using the remote controller’s | |
number buttons, and then press | ||
controller | ||
| the [ENTER] button. | |
| The new security code has been set. |
Note:
•If you forget your security code, enter “8888” instead. “8888” is a security code that can always be used.
DVD Priority Contents
This setting determines what is played when a
SACD Priority Contents
SACDs have two separate areas for storing audio
With this setting you can determine how SACDs are played by the
Multi ch Area (default): The multichannel audio
tracks are played.
2 ch Area: The
CD Area: The CD layer of hybrid SACDs is played.
Note:
•This setting determines which area of the disc is played initially. If Multi ch Area is selected, and an SACD that contains no multichannel area is loaded, the
HDMI Control
With this setting, you can turn RIHD control over HDMI on or off.
On (default): RIHD control on.
Off: RIHD control off.
Notes:
•RIHD (Remote Interactive over HDMI) is Onkyo’s implementation of CEC (Consumer Electronics Con- trol), which allows integrated system control over HDMI and is part of the HDMI standard. In addition to Onkyo AV components, it allows interoperability with
•Select Off if a connected component is incompatible or you’re not sure about its compatibility.
•If operation is unreliable when set to On, select Off instead.
•When you set the RIHD function, set the HDMI Out- put setting (see page 49) to “On.”
57