Onkyo DV-SP506 instruction manual Troubleshooting, No Sound from the Hdmi OUT?

Troubleshooting—Continued

Symptom	Possible cause	Remedy
	No Sound from the HDMI OUT?
	The HDMI Audio Out setting is set to Off.	Change the HDMI Audio Out setting to On
		(page 51).
	The DV-SP506 is connected to the DVI jack	You won’t hear any sound from the HDMI OUT if
	on your TV or AV receiver.	your TV or AV receiver only supports DVI.
	The HDMI setting on your TV or AV receiver	Change the HDMI setting on your TV or AV
	is set to DVI.	receiver to HDMI.
	Your TV or AV receiver doesn’t support Dolby	Change the HDMI Audio Out setting to Auto or 2ch
	or DTS.	PCM (page 51).
	Your TV or AV receiver doesn’t support	Change the Linear PCM Out setting to Down Sam-
	88.2 kHz, 96 kHz, 176.4 kHz or 196 kHz
		ple On (page 51).
	PCM.
	The HDMI Audio Out setting is set to 6ch	Set the HDMI Audio Out setting to Auto or 2ch
	PCM or 6ch DSD, but your AV receiver or TV
		PCM (page 51).
	does not support these formats.
	No Digital Audio Output?
	The HDMI Audio Out setting is set to Off.	Change the HDMI Audio Out setting to either Auto
		or PCM (page 51).
No sound?
	Your TV or AV receiver doesn’t support Dolby	Change the HDMI Audio Out setting to other than
	or DTS.	Off (page 51).
	Your TV or AV receiver doesn’t support	Change the Linear PCM Out setting to Down Sam-
	88.2 kHz or 96 kHz PCM.	ple On (page 51).
		Nothing is output by the OPTICAL and COAXIAL
	The SACD Audio Setup setting is set to DSD.	outputs when DSD is selected. Change the SACD
		Audio Setup setting to PCM (page 53).
		The DV-SP506 will not be able to play DTS format
	Your TV or AV receiver doesn’t support DTS.	audio or soundtracks. On your DVD-Video disc’s
		audio setup menu, select an audio format other than
		DTS.
	The source material is DTS and the Digital	When the Digital Audio Out setting is set to PCM,
		DTS sources are not output by the digital audio out-
	Audio Out setting is set to PCM.
		puts. Change the setting to ALL.
	A DVD-Audio disc featuring 176.4 kHz or	The OPTICAL and COAXIAL outputs cannot out-
		put 176.4 kHz or 192 kHz audio. Set the Linear
	192 kHz audio is being played.
		PCM Out setting to Down Sample On.
	The disc uses copy protection that prevents	Use another disc.
	audio being output by the digital outputs.
The picture distorts occa-	The disc is dirty.	Remove the disc and clean it (page 10).
	You’re using the Fast Forward or Fast Reverse	A little picture distortion may occur when using
sionally?
	function.	these functions. This is normal.
Picture instability or	The DV-SP506 is connected to your TV via a
	VCR or other video equipment whose copy	Connect the DV-SP506 directly to your TV.
noise?
	protection system is affecting the picture.
	No disc loaded.	Load a disc (page 31).
	The disc is incompatible.	Load only compatible discs (pages 8, 9).
	The disc is upside down.	Load the disc the correct way up (page 31).
Can’t start playback?	The disc is not centered in the disc tray.	Place the disc in the center of the disc tray
		(page 31).
	The disc is dirty.	Remove the disc and clean it (page 10).
	The disc supports parental lock and the Paren-	Turn off the Parental Lock function (page 56).
	tal Lock function is on.

63