Theta Digital LC3015-2 manual Other Requirements

Other Requirements

Air supply

ITEM	Pressure/Volume	ISO8573.1 standard
Machine	80 psi at 9 ft3/min 4	Class 3-4-3
As cutting gas	140 psi at 35 ft3/min 5	Class 3-4-3
Dust collector - Torit DFT3-18	9 scfm at 90-100 psi	Class 4-5-5
Dust collector - Farr GS-12	12 scfm at 90 psi
Laser Oscillator Gas	see laser pre-mix gas specification (p. 9 )	n/a
Assist gases	see assist gas recommendations (p. 10 )	n/a
Coolant
Chiller coolant includes the following:
Distilled water	(Koolant Kooler: 75 gallons, CKD: 100 gallons, Orion: 50 gallons)
Additive (provided with machine) 6	1 gallon provided (mix 1:100 additive:water)

Connections

Hoses to connect air supplies to machine and dust collector

Laser pre-mixed gas (see page 9)

Assist gas (oxygen minimum) (see page 10)

42 micron maximum particulate size

5Pressure and flow based on process requirements (material type and thickness) - contact Amada to discuss.

6ISOGUARD Corrosion inhibitor, part# 71679859. Additional quantities available from AESI, at (714) 670-2111

LC3015 Theta User Installation Guide - October, 2003 7