The Chiller
The chiller is very important to the reliable operation of your laser cutting machine.
The chiller must be placed so that an adequate flow of air is maintained.
The positioning of the chiller is flexible. Two lengths of flexible hose and appropriate fittings are provided for connection to the system.
If you plan to hard plumb the system, use only Brass, Stainless Steel, and/or Plastic. Black steel or Galvanized pipe and fittings are not permitted.
If the system is
The chiller is a closed loop system, but requires periodic addition of water and/or additives to re- place evaporative losses.
The chiller must be filled with proper coolant mixture. See page 7 for details.
DO NOT FILL THE CHILLER WITH CITY WATER, OTHERWISE SERIOUS AND EXPENSIVE DAMAGE MAY BE INFLICTED ON THE LASER OSCILLATOR
16 | LC3015 Theta User Installation Guide - October, 2003 |