Theta Digital LC3015-2 manual Protective Coatings

Protective Coatings

The machine may have protective coatings, possibly including wrapping paper and/or cosmoline or other grease.

When present, the wrapping paper must be removed before moving the machine axes. Protec- tive grease or cosmoline must be thoroughly cleaned off before running the machine.

￿Check the X-axis, Y-axis, and Z-axis LM guides for wrapping paper and protective coating. Make sure that you remove any paper from both sides of the carriage.

￿Check Z-axis guides and ballscrew and clean up as needed.

￿A suitable solvent such as kerosene may be used to remove the protective coating.

32 LC3015 Theta User Installation Guide - October, 2003