Arcam DV79 manual Technical specifications, Continual improvement policy

Technical specifications

General

Power Requirements	100/115V or 230V AC,
	set by voltage selector switch on rear panel
Power consumption	< 35 VA
Dimensions	435mm x 80mm x 350mm
Weight	net: 5.2kg; packed: 8.0kg
Video outputs
Composite video	1 x gold plated phono. 1V pk-pk in 75Ω
S-Video	1 x 4-pin mini-DIN. Y 1V pk-pk in 75Ω, C 0.3V pk-pk in 75Ω
Component video	Interlaced or Progressive
	3 gold plated phono sockets.
	Y 1V pk-pk in 75Ω, Pb 0.7V pk-pk in 75Ω, Pr 0.7V pk-pk in 75Ω
SCART socket with RGB video	All 0.7V in 75Ω, composite video 1V in 75Ω, and stereo audio
	Auto switching of TV with aspect ratio control
HDMI	19-pin HDMI connector
	Supported video formats are:
	720x576p, 720(1440)x576i, 720x480p, 720(1440)x480i,
	all with basic audio.
Audio outputs
Analogue audio outputs	Stereo or multi-channel output on gold-plated phono sockets
Output level	2.2V rms at 0dB signal,
	4V rms with HDCD discs (left and right channels only)
Frequency response	20Hz to 20kHz (+0.1db, –0.5dB)
THD+N	<0.005% for 1kHz 0dB signal,
	measured 22Hz–22kHz, unweighted
Signal-to-noise ratio	105dB, measured 20Hz–20kHz, unweighted
Digital audio output (IEC958)	PCM/Dolby digital/MPEG/DTS on gold plated phono (coax) and
	TOSLINK (optical)
Accessories supplied
	CR-415 Remote control
	2 x AAA batteries
	mains lead
E&EO

NOTE: All specification values are typical unless otherwise stated.

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.

English

DV79

E-25