Returns to the previous screen.
Changes to the REAR selection screen when “Setting the Picture Output” (page 36) is set to ON.
AThe information about the current source.
e.g. The DISC image, Track NO. and Track time will be displayed in DISC mode.
2 Touch [RADIO].
The screen changes to the Radio mode main display.
Display example for FM Radio main screen
Changes to the SOURCE selection screen (to Step 1 screen)
Displays the source name, such as radio band, etc., that is selected
Changes the display style, refer to “Selecting the Display Style” (on page 13).
Displays time and volume level Function Guide:
The function guide display varies depending on each source.
The contents of the function guide change by touching [P1/2]*, [P1/3]* or [P1/4]* on the function guide, and many other operations can be performed.
* Display may vary depending on the connected devices.
3 Touch [SOURCE] on the main source screen to change to another source screen, and select the desired source from the SOURCE selection screen.
•After 5 seconds of each operation in the visual mode, the screen changes to the visual screen only.
To display the main source screen, touch the display panel, then touch [ESC] on the screen. The SOURCE selection screen appears by touching [SOURCE] on the changed main source screen.
Displaying the Numeric Keypad Input Screen
The numeric keypad input screen is displayed when the DVD mode is selected for searching a title or chapter. It can also be used for entering a country code or password for DVD setup.
1 Touch [10KEY] on the main source screen.
2 Touch the desired numeric key.
Display example for numeric keypad
Operation buttons of this area can be used while displaying the numeric keypad input screen. Input screen area
Closes numeric keypad input screen All input numbers will be deleted Previous number will be deleted Input number is confirmed Numeric keypad
The numeric keypad input screen closes when the area is touched while displayed.