Setting the Bluetooth Connection
(BLUETOOTH IN)
Setting item: BLUETOOTH IN
Setting contents: ADAPTER / OFF
ADAPTER: Select when the optional Bluetooth box is connected. The TEL screen of the Bluetooth is displayed.
When an external interruption occurs, the display changes to the TEL screen.
OFF: Select to ignore any external interrupts.
•The setting cannot be made when “Setting the External Device Interrupt Mode” (page 35) is set to ON.
•For details on Bluetooth operation, refer to the Owner’s Manual of the Bluetooth Box.
•If the Bluetooth Box compatible with the Voice Dial function is connected, the Voice Dial function can be used.
Setting the USB Adapter to ON/OFF
If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting contents: OFF / ON
OFF: Does not display the USB source name on the SOURCE selection screen.
ON: Displays the USB source name on the SOURCE selection screen.
•If ON is set even when a CD changer is connected, the source name on the SOURCE selection screen will change from CD CHG to USB.
Setting the VISUAL Soft Button
Setting item: VISUAL KEY
Setting contents: VISUAL / NAV.
VISUAL: Recalls the VISUAL selection screen by touching [VISUAL].
NAV.: Switches directly to the navigation screen by touching [VISUAL].
Setting the OPTION Button on the Unit
The unit’s 
(OPTION) button function can be changed.
Setting item: OPTION KEY
Setting contents: V. SEL / TEL
V. SEL: Press 
(OPTION) to recall the V. SEL screen.
TEL: If you press 
(OPTION) when the Bluetooth Box is connected, the Bluetooth TEL screen will be recalled.
Setting the Digital Output
To connect an audio processor using the optical digital output, set to “ON” by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
•Afterwards, set ACC to OFF once, then turn it ON again. The setting of Digital Output is decided.
Setting the AUX+ Mode
An external device (such as a portable music player) can be connected to the iPod Direct connector of this unit. An iPod Direct/RCA Interface cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod Direct connector at the same time.
Setting item: AUX+ IN
Setting contents: OFF / ON
OFF: AUX+ source is not displayed
ON: AUX+ source is displayed
•When OFF is selected, the settings related to AUX+ cannot be changed from this unit.
•Only when an Alpine TV tuner is connected, you can operate the displayed function guide from this unit.
Adjusting the AUX+ Audio Level
After setting to ON in “Setting the AUX+ Mode”, this setting can be carried out.
Setting item: AUX+ LEVEL
Setting contents: LOW / HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.