Setting the A.PROCESSOR
1
2 Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
3 Touch [AUDIO SETUP].
The AUDIO SETUP screen appears.
4 Touch [ 
] of A.PROCESSOR.
The A.PROCESSOR list screen appears.
5 Touch [
] , [
] or [ 
] etc., of the desired item to change its setting.
Setting items:
MEDIA XPANDER / BASS SOUND CONT. / DOLBY PLII/REAR FILL /
•Touching [ESC] will change to the main source screen.
•Touching [
] to return to the previous screen.
Setting the MX Mode of the External Audio Processor
Before performing the operations below, set MX (Media Xpander) mode of the
Setting item: MEDIA XPANDER
1 Select ON or OFF of MX by touching [
] or [
] of
MEDIA XPANDER.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
2 Touch [ 
] after setting to ON.
The MEDIA XPANDER setup screen appears.
3 Touch [
] or [
] of the desired MX mode.
•Music source (such as radio broadcasts and CDs, excluding AM radio) level can be set.
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used to reproduce the sound cleanly by making use of the data quantity.
MX CMPM (OFF, CMPM MX 1 to 3)
This corrects information that was omitted at the time of compression. This reproduces a
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and produces well balanced sound in all the bands.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
(DVD MUSIC)
This disc contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately.
MX AUX (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MUSIC, or MOVIE) that corresponds to the media connected.
•The contents of MX set here is reflected to
•When OFF is selected, MX effect of each MX mode will be OFF.
•Each music source, such as radio, CD and MP3 can have its own MX setting.
•MX mode does not function when MX is ON for AM radio.
•MX CMPM is applied for MP3/WMA/AAC and iPod.
•The MX setting can be performed only when a source is currently selected.
Setting Bass Sound Control
Setting item: BASS SOUND CONT.
Setting Bass Compressor
You can adjust the sound of low frequencies as desired.
Touch [
] or [
] of BASS COMP. to select the desired mode.
Bass sound is emphasized more as the mode is sequentially switched as MODE 1 
2 
3, offering you vivid low frequencies.
Select OFF when the setting is not necessary.
Setting Bass Focus
Using the previously specified delay number (time difference) allows you to set a time difference between the
Set the delay number in the front and rear, and on the right and left of the desired speaker by touching the respective [
] or [
] button.
•Any setting in Bass Focus is applied in time correction, too (page 43).