Alpine IVA-W502E owner manual Auxiliary Device Optional, TUE-T200DVB Operation Optional, 54-EN

Page 55

Auxiliary Device (Optional)

Operating Auxiliary Devices (Optional)

To operate your devices connected to the AUX terminals on the rear panel of IVA-W502E (AUX mode) or to the iPod Direct connector by using iPod Direct/RCA Interface cable (sold separately) (AUX+ mode), follow the procedure described below.

WARNING

It is dangerous (and illegal in many states) for the driver to watch the TV/Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.

Install the IVA-W502E correctly so that the driver cannot watch TV/Video unless the vehicle is stopped and the emergency brake is applied.

If the IVA-W502E is not installed correctly, the driver will be able to watch the TV/Video while driving the vehicle and may be distracted from looking ahead and cause an accident. The driver or other people could be severely injured.

•If you try to activate the auxiliary device while driving, the display will show the warning-PICTURE OFF FOR YOUR SAFETY.

1 Touch [SOURCE] on the main source screen.

The source screen appears on the display.

2 Touch [AUX]*1 or [AUX+]*2.

The external input screen is displayed.

3 Touch [NTSC/PAL] to change the video input.

4 Touch [COMP. /S-VIDEO]*3to switch the video signal input mode.

The mode switches with each touch.

*1 The name which is given as the source name in “Setting the AUX Mode” on page 36 is displayed.

*2 The mode which is given as the source name in “Setting the AUX+ Mode” (page 37).

*3 The video signal can be input in two ways, selecting the right mode depending on the connection method. Switching to the COMP. mode when using the Video Input Connector. Switching to the S-VIDEO mode when using the S Video Input Connector.

•If the AUX mode is not displayed on the main menu, set AUX IN to ON by following “Setting the AUX Mode” (page 36).

•The setting of switching NTSC/PAL, which you have set in this section can be used in same way in “Switching the Visual Input Signal System” on page 36.

•The display mode changes by touching [WIDE].

For operation, refer to “Switching Display Modes” on page 26.

•After connecting the KCA-410C, its AUX input can be used only in INTERRUPT MODE. For details, refer to the KCA-410C Owner’s Manual.

TUE-T200DVB Operation (Optional)

Operating the TUE-T200DVB (Optional)

Operable when optional TUE-T200DVB is connected.

When DVB-T is selected in “Setting the AUX Mode” (page 36), the source is displayed in SOURCE selection screen.

1 While your vehicle is parked, touch [SOURCE] on the main source screen.

The source screen appears on the display.

2 Touch [DVB-T].

The DVB-T screen is displayed.

3 Perform the desired operation.

Channel Number Up/Down or favourite Channel Number Up/Down

Touch [CH.]* to select changing the Channel or the favourite Channel.

Touch CH. [ ] or [ ] to move the Channel number Up/ Down.

Touch FAV [ ] or [ ] to move the favourite Channel number Up/Down.

* The button displays the current changing mode ([CH.] or [FAV]).

Calling up Main Menu Screen

Touch [MENU] to call up the main menu screen.

Calling up Menu Operation Mode

1 Touch [P1/2].

The function guide appears.

2 Touch [MENU CONT] to call up the menu operation mode.

Switching the Source

Touch [BAND].

The source switches with each touch.

Calling up Electronic Programme Guide (EPG)

Touch [EPG] to call up the Electronic Programme Guide.

Scanning Mode

1 Touch [P1/2].

The function guide appears.

2 Touch [A.MEMO] to start the auto scan procedure.

•For detail, refer to the Owner’s Manual of the TUE-T200DVB sold separately.

Switching the Video Input Mode

Touch [COMP./S-VIDEO].

The video signal input mode switches with each touch.

•Switching to the COMP. mode when using the Video Input Connector. Switching to the S-VIDEO mode when using the S Video Input Connector.

54-EN

Page 54 Page 56
Image 55
Page 54 Page 56
Contents IVA-W502E Contents Operating Instructions Setup Installation Connections Operating Instructions Precautions Two-layer DVD disc compatible Mark logo Recorded Content Disc sizeMusic CD CD singleDiscs that cannot be played Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs Page Location of Controls Accessory ListTurning Power On or Off Getting StartedAdjusting the Monitor Viewing Angle Adjusting the VolumeLowering Volume Quickly How to view the DisplayTouch Radio Screen changes to the Radio mode main displayDisplaying the Numeric Keypad Input Screen 12-EN13-EN RadioListening to the Radio Selecting the Display Style14-EN Presetting Stations ManuallyPresetting Stations Automatically Tuning to Preset StationsSelecting Folders concerning MP3/ WMA/AAC PlaybackRepeat Play X. Random Play16-EN About MP3/WMA/AACDisplays tag information for DivX DVD/Video CD17-EN Terminology18-EN To display the DVD mode screenPlaying a Disc If a menu screen appears19-EN Displaying the Menu Operation Mode ScreenDisplaying the Top Menu Screen Displaying the Menu ScreenStopping Playback Searching by ProgrammeSearching by Playlist Stopping Playback PRE StopSelecting Programme Skip Playing Still Frames PausingSelecting Playlist Skip Slow Motion Playback22-EN Searching Directly by Chapter, Track or File Number23-EN Switching the AngleSwitching the Audio Tracks Switching the Subtitles Subtitle LanguageAbout DivX Other Useful FeaturesSwitching from the disc menu Adjusting the AudioSelect a desired track or folder Setting the LoudnessSearch Function 25-EN26-EN Switching Display ModesSwitching the Visual Source Only Simultaneous Function Rear Entertainment FunctionCancelling the Simultaneous Function SetupBlackout Mode On and Off DVD Setup OperationSetting of the Subtitle Language Changing the language settingSetting of the Menu Language Setting of the Audio Language29-EN Setting the Rating Level Parental LockChanging the Digital Output Setting Touch the input screen to enter a new 4-digit password30-EN Setting of the DVD-Audio Playback Mode Setting the Downmix ModeSetting the TV Screen Mode Setting of the Bonus Code32-EN Display Setup OperationSetting the Video CD Play Mode Displaying DivX Disc InformationSetting Automatic Background Textures Setting the Brightness of the BacklightingAdjusting the Minimum Level of Backlight Switching Background TexturesGeneral Setup Operation Switching the function of the remote sensor System Setup OperationSetting the External Device Interrupt Mode Setting the Interrupt Icon DisplaySetting the AUX Mode Setting the Rear Camera InputSetting the Navigation Mode Setting the Navigation InterruptionSetting the Option Button on the Unit Setting the Bluetooth ConnectionSetting the USB Adapter to ON/OFF Setting the Visual Soft ButtonC. Setting Operation Adjusting Picture Quality Adjusting Image ContrastStoring Visual EQ 40-EN External Audio Processor Optional41-EN Setting the A.PROCESSORSetting the MX Mode of the External Audio Processor Setting Bass Sound ControlOver Adjustment Using the Pro Logic II Mode42-EN 43-EN Phase SwitchingGraphic Equalizer Adjustments Performing Time Correction Manually T.CORR44-EN Parametric Equalizer AdjustmentsSetting the Speakers Setting of Dolby DigitalAdjusting the speaker levels Output Level Speaker SetupAdjusting the DVD Level Achieving powerful high volume sound Listening ModeLinear PCM Setting Storing Settings in the MemoryCalling up the Preset Memory Changing MultEQ modeSetting the MX Level Media Xpander Equalizer Presets F-EQ47-EN Adjusting the Time Correction T. Corr Adjusting the Parametric Equalizer Curve P-EQAdjusting the Graphic Equalizer Curve G-EQ Setting the Time Correction Unit T.CORR49-EN Adjusting the Crossover Settings X-OVERAbout Time Correction Setting the Subwoofer51-EN 2ch FRONT/REAR/SUBW. mode2ch 3WAY mode About the Crossover52-EN About ImprintTouch NAV Switching the Navigation Screen OptionalNavigation System Optional 53-ENOperating the TUE-T200DVB Optional Auxiliary Device OptionalTUE-T200DVB Operation Optional Operating Auxiliary Devices Optional55-EN Changer OptionalControlling CD Changer Optional Multi-Changer Selection Optional56-EN USB Memory OptionalControlling USB Optional Bank Function USB memory onlySearching for a desired Song Random Play Shuffle M.I.X57-EN 58-EN Select the desired Folder Folder up/ downAbout MP3/WMA/AAC File of USB Memory Searching by artist nameTouch iPod*1 or iPod-2*2 IPod Optional59-EN About iPods usable with this unitTouch ALL To cancel M.I.X. play, touch ALL orDirect Search Function 60-ENAbout DVDs Information61-EN 62-EN Terminology63-EN List of Language CodesFor details, see 64-EN List of Country Codes65-EN 66-EN Case of Difficulty67-EN Indication for CD changer Indication for iPod Mode68-EN Indication for DVD/Video CDIndication for USB memory 69-ENGeneral 71-EN Installation and Connections72-EN InstallationPull the unit out, keeping it unlocked as you do so How to use a SealInstalling the Face Plate 73-ENTo prevent external noise from entering the audio system Connection Diagram of Spst Switch Sold SeparatelyIf the ACC power supply is not available 74-ENConnections 76-EN Ground Lead Black RCA Output/Input Connector IPod AUDIO/VIDEO Input ConnectorMIC Input Connector 77-EN78-EN System Example79-EN Digital Output Terminal Ai-NET ConnectorRGB Cable Sold Separately RGB Input Terminal 80-EN When Connecting External EquipmentVideo/Audio Output Connectors AUX Output Use when connecting an optional monitor etc
Top Page Image Contents