Aiwa XD-SPM823 operating instructions Dolby DIGITAL/PCM

Connections (continued)

D Connecting to a TV and an AV receiver equipped with a Dolby Digital (AC-3) decoder

TV

			yellow
	to the video input jack (yellow)
	Video cord (supplied)
	yellow
Rear of the unit	to VIDEO OUT jack (yellow)
	VIDEO OUT				COMPONENT/
	OPTICAL				PROGRESSIVE SCAN
		Y			S-VIDEO
	DIGITAL OUT
				S-VIDEO	VIDEO
	L	PR/CR	L	OUT	OUT
	R PB/CB		R	COAXIAL
	AUDIO	COMPONENT	AUDIO	DIGITAL
		VIDEO OUT/
	OUT1	PROGRESSIVE	OUT2	OUT
		SCAN
	to DIGITAL OUT			to DIGITAL OUT
	OPTICAL jack			COAXIAL jack

to an AC outlet

	Coaxial cord (not supplied)
Optical cord (not supplied)
to the digital input jack	Receiver equipped with
	a Dolby Digital decoder

Front speaker (L)

Front speaker (R)

Surround speaker (L) Center speaker Subwoofer Surround speaker (R)

Set the setup menu correctly after connecting

Set the "TV Aspect" and "Digital Audio Output" in the setup menu according to the TV and audio equipment connected to the unit as follows:

(See "Changing Setup Values" on page 46 for details.)

TV Aspect

When the TV has a conventional 4:3 screen: 4:3 Letterbox or 4:3 Panscan

When the TV has a wide 16:9 screen: 16:9 Wide

Digital Audio Output

DOLBY DIGITAL/PCM

CAUTION

DO NOT select "DOLBY DIGITAL/PCM" for the "Digital Audio Output" in the setup menu when connecting to an AV receiver not equipped with a Dolby Digital decoder (with an optical or coaxial connecting cord).

Merely attempting to play a disc may cause a screeching noise which could be harmful to your ears and damage the speakers. In this case, be sure to select "PCM" for the "Digital Audio Output".

20 ENGLISH