Before Use (continued)
Cleaning discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature increase inside the car.
Notes on copyright
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission.
This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, the picture noise will appear.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Remote control
Installing batteries
Detach the battery cover on the rear of the remote control, and insert two LR03 (size AAA) batteries with 0 and 9 aligned correctly.
LR03 (AAA)
When to replace the batteries
The maximum operating distance between the remote control and the sensor of the unit is approximately 7 meters (23 feet). If the operating range decreases, replace the batteries with new ones.
NOTES
•When operating with the remote control, point the top of the remote control toward the DVD player.
•If the unit is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.
•The remote control may not operate correctly when:
-There is an intense light, such as sunlight, in the line of sight between the remote control and the DVD player.
-There is fluorescent lighting near the remote sensor in the display window of the unit.
-Other remote controls are used nearby (those of a TV, etc.).
8 ENGLISH