Aiwa XD-SPM823 operating instructions Playback, Loading discs

Playback

6STANDBY/	1 3 4	2
ON indicator

12

4

About the symbol display

•The symbol will be displayed on the TV screen if you press a button which cannot be used or enter an invalid number.

•Some DVDs may have places where they do not allow

pressing certain buttons. The symbol will be displayed on the TV screen if you press a button that is not allowed in such a place.

Getting ready to play

•	Turn on the TV, and set its video source (Video 1, Video
	2, Video 3, etc.) to the one connected to the unit.
•	Turn on the audio equipment connected to the unit. Set	OPERATIONS
	its input source to the one connected to the unit.

Loading discs
1
	Press POWER.	BASIC
The unit turns on and the 6STANDBY/ON indicator turns
green. The “aiwa” screen appears on the TV screen.
2
	Press zOPEN/CLOSE.
The disc compartment opens.
3
	Load a disc in the tray at the center
	position.

Place a disc in the tray guides (round slotted area) with the label side facing up. When loading an 8-cm disc, place it in the inner slotted area correctly.

4 To load another disc, press DISC SKIP.

The disc trays rotate and the next tray comes to the center
position.
Place a disc in the tray.	En
Repeat this step to load other discs (up to five discs).

Now you are ready to start playback.

NOTES

•Do not shock or vibrate the unit while playing.

•Do not push or shock the disc compartment while rotating the disc trays.

•Do not put any objects other than discs on the disc trays.

CONTINUE

ENGLISH 23