Aiwa XD-SPM823 operating instructions Progressive Scan, Digital Audio Output, Lright cursor button

Page 52

Changing Setup Values (continued)

Progressive Scan

When connecting the unit to a progressive-scan compatible TV, you can take advantage of the unit's progressive scan output enabling high quality video playback with less flickers.

CAUTION

DO NOT set the "Progressive Scan" to "On" when connecting to a TV that is not compatible with progressive scan signals. If you set "Progressive Scan" to "On" in error, the picture will appear scrambled. In this case, reset the unit by holding down s for more than 5 seconds in stop mode. The original video output will be restored and the picture will become visible again.

Digital Audio Output

Set the audio output of the unit according to the type of audio equipment connected to the unit.

CAUTION

DO NOT select "DOLBY DIGITAL/PCM" or "Stream/PCM" for the "Digital Audio Output" when connecting to an AV receiver not equipped with a Dolby Digital decoder or DTS decoder (with an optical or coaxial connecting cord).

Merely attempting to play a disc may cause a screeching noise which could be harmful to your ears and damage the speakers. In this case, be sure to select "PCM" for the "Digital Audio Output".

1 Press i/k to select "Progressive

Scan" in the setup menu and press the lright cursor button.

Disc Audio

Off

Disc Subtitle

On

Disc Menu

 

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

 

Others

2

 

Press i/kto select "On" or "Off" and

 

press SELECT/ENTER.

On:

You can change the setting to "On" when using the COMPONENT VIDEO OUT/PROGRESSIVE SCAN jacks on the unit for connection to a TV compatible with progressive scan signals.

Off:

Do not change the setting (keep the setting "Off") when using the COMPONENT VIDEO OUT/PROGRESSIVE SCAN jacks on the unit for connection to a TV which is not compatible with progressive scan signals.

Do not change the setting (keep the setting "Off") when using the VIDEO OUT jack or S-VIDEO OUT jack on the unit for connection to a TV.

NOTES

The Progressive Scan menu item is not displayed when the VIDEO OUTPUT switch is set to "S-VIDEO".

Composite video signals are not output from the VIDEO OUT jack on the unit if "Progressive Scan" is set to "On".

1

Press i/k to select "Digital Audio

 

Output" in the setup menu and press

 

the lright cursor button.

 

 

Disc Audio

DIGITALDOLBY /PCM

 

 

Disc Subtitle

Stream/PCM

 

 

Disc Menu

PCM

 

 

Rating

 

 

 

Country Code

Sample Freq.

 

 

TV Aspect

48KHz

 

 

Menu Language

96KHz

 

 

Progressive Scan

 

 

 

Digital Audio Output

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Others

 

 

 

 

 

2

Press i/kto select the appropriate

 

setting and press SELECT/ENTER.

DOLBY DIGITAL/PCM:

Select this when connecting to an AV receiver equipped with a Dolby Digital (AC-3) decoder.

Stream/PCM:

Select this when connecting to an AV receiver equipped with a DTS decoder or an MPEG decoder, or an AV receiver equipped with both Dolby Digital and DTS decoders.

PCM:

Select this when connecting to an audio system without a Dolby Digital (AC-3), DTS or other special decoder.

52 ENGLISH

Image 52
Contents Owner’s record Model NoExplanation of Graphical Symbols EnglishPower sources CleaningPower cord protection Accessories, carts and standsConnecting Sound volumeHeadphones Damage requiring serviceTable of Contents Before Use Disc symbols used in this manualSupported disc formats Cleaning the unit Disc-related termsHandling the unit Handling discsCleaning discs Remote controlBefore Use Storing discsGeneral information on progressive scan What is a progressive scan?Advantages of progressive scan conversion in the DVD player Parts and Controls Front panelSetup button 0DISPLAY button@ TOP Menu button $REPEAT buttonParts and Controls 9ALL AB repeat indicatorDisplay window Connecting to a TV ConnectionsBefore making connections About component video output jacks Y, PR/CR, PB/CBConnecting to audio equipment ConnectionsSet the setup menu correctly after connecting Connecting to a TV equipped with an S-video input connector Set the Video Output switch before connectingTo On when connecting to a TV that is not compatible PCM Connecting to a TV and a stereo system Dolby DIGITAL/PCM Video OUT PR/CRL PB/CB Coaxial Playback Loading discsPlayback Starting playbackUnit Press cTo turn the power off To replace discs during playbackTo skip to the next disc To skip to the desired discFrame advance Still pauseResuming playback Fast forward and fast reverse Slow playbackSkipping Press r/f or g/ tduring playbackPress j/lto change the setting Basic operation of the OSD On-Screen Display menuSelected menu item To turn off the OSD menuMenu item Current status/setting Function Description of each OSD menu itemStop mode SearchTitle/Track search Press Display during playback orChapter search Time searchSearch Mark searchTo mark a desired point To clear a marked pointChanging the angle Zooming and Changing the AngleZooming the picture Press Random during playback or in stop mode Random and Repeat PlaybackRepeat playback Press Repeat during playbackRepeating a section between two Specified points A-B repeat During playback, press A-B atStarting point a of the section you Want to repeatProgrammed Playback Press Program in stop modeSelect the disc tray number To delete a track from the program setting To clear all the programs settingsPress cto start playback To repeat the programmed playbackPress j/lto select 3D SUR Creating a 3D Surround EffectTo turn off the 3D surround effect Changing the Audio Track/Channel Press Audio during playbackPress Subtitle during playback Desired language is selectedPress Subtitle repeatedly until To turn off the subtitle displayPlaying an MP3 Disc GlossaryPlaying an MP3 Disc Press i/kto select a trackBasic operations of MP3 playback Load an MP3 discOSD On-Screen Display menu for the MP3 disc Programmed playback To delete a track from the program list To clear the entire programChanging Setup Values Basic operationsDisc Audio Press i/k to select the desired languageChanging Setup Values Disc SubtitleRight cursor button OriginalRating Number buttonsCountry Code PreviousPress i/k to select the first Carry out of Rating onMenu Language Press i/k to select MenuOutput in the setup menu and press Progressive ScanDigital Audio Output Lright cursor buttonOthers Country codes Code CountryYugoslavia Language codes Code LanguageTroubleshooting Specifications Ntsc